Posted: Thu Nov 01, 2007 9:59 pm Post subject: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Cihan,
I used sipp (http://sipp.sourceforge.net/) to make sip load balancing test.
Just set up the first asterisk with a h324m_call to the second asterisk box, it allows even to send rtp streams.
BR
Sergio
Quote:
----- Original Message -----
From: Cihan Aksakal (cihan.aksakal@viif.de)
To: Development discussion of video media support in Asterisk (asterisk-video@lists.digium.com)
Sent: Wednesday, October 31, 2007 6:28 PM
Subject: [spam][Asterisk-video] Outbound Call / Callout Support
Hi all,
I am currently evaluating how to make h324m outbound calls and need some help.
We have two main objectives:
<![if !supportLists]>· <![endif]>We want to make load tests using two asterisk machines with up to 4 E1 ports per machine.
<![if !supportLists]>· <![endif]>and outbound calls to 3G handsets.
The outbound call should be connected to an asterisk application which is providing a 3G-dtmf-video-portal using h324m_gw(). Inbound calls to that application using h324m_gw() is working.
Any ideas how to setup such an environment?
Regards,
Cihan Aksakal
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Fri Nov 02, 2007 10:21 am Post subject: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Sergio,
Nice tool, thank you for the tip.
But we want to make outbound video calls to 3G handsets as well.
And I would prefer to use all components of our system during load tests. Using only Sip would mean, that we won’t use our E1 cards.
Best Regards,
Cihan
Von:asterisk-video-bounces@lists.digium.com [mailto:asterisk-video-bounces@lists.digium.com] Im Auftrag von Sergio Garcia Murillo
Gesendet: Donnerstag, 1. November 2007 23:13
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Subject: [spam][Asterisk-video] Outbound Call / Callout Support
Hi all,
I am currently evaluating how to make h324m outbound calls and need some help.
We have two main objectives:
· We want to make load tests using two asterisk machines with up to 4 E1 ports per machine.
· and outbound calls to 3G handsets.
The outbound call should be connected to an asterisk application which is providing a 3G-dtmf-video-portal using h324m_gw(). Inbound calls to that application using h324m_gw() is working.
Any ideas how to setup such an environment?
Regards,
Cihan Aksakal
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
-- Executing [665@test:1] h324m_call("SIP/sippuas-0823c430", "666@test") in new stack
-- Executing [666@test:1] Set("Local/666@test-03fc,2", "CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [666@test:2] NoOp("Local/666@test-03fc,2", "transfer=VIDEO") in new stack
-- Executing [666@test:3] Set("Local/666@test-03fc,2", "CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [666@test:4] NoOp("Local/666@test-03fc,2", "ul1=38") in new stack
-- Executing [666@test:5] Dial("Local/666@test-03fc,2", "Zap/g1/162…") in new stack
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
-- Called g1/162…
-- Channel 0/1, span 1 got hangup request, cause 38
-- Zap/1-1 is circuit-busy
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'Local/666@test-03fc,2' status is 'CONGESTION'
== Spawn extension (test, 665, 1) exited non-zero on 'SIP/sippuas-0823c430'
### Log with pri debug span 1
-- Executing [665@test:1] h324m_call("SIP/sippuas-0823c430", "666@test") in new stack
-- Executing [666@test:1] Set("Local/666@test-01c4,2", "CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [666@test:2] NoOp("Local/666@test-01c4,2", "transfer=VIDEO") in new stack
-- Executing [666@test:3] Set("Local/666@test-01c4,2", "CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [666@test:4] NoOp("Local/666@test-01c4,2", "ul1=38") in new stack
-- Executing [666@test:5] Dial("Local/666@test-01c4,2", "Zap/g1/162…") in new stack
-- Making new call for cr 32796
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
Quote:
Protocol Discriminator: Q.931 (8) len=35
Call Ref: len= 2 (reference 28/0x1C) (Originator)
Message type: SETUP (5)
[04 02 88 90]
Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8)
Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
Ext: 0 User information layer 1: Unknown (24)
[18 03 a9 83 81]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
ChanSel: Reserved
Ext: 1 Coding: 0 Number Specified Channel Type: 3
Ext: 1 Channel: 1 ]
[6c 06 21 80 73 69 70 70]
Calling Number (len= 8) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
Presentation: Presentation permitted, user number not screened (0) 'sipp' ]
[70 0b a1 31 36 32 32 31 31 32 37 38 30]
Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '162…' ]
q931.c:2879 q931_setup: call 32796 on channel 1 enters state 1 (Call Initiated)
-- Called g1/162…
< Protocol Discriminator: Q.931 (8) len=14
< Call Ref: len= 2 (reference 28/0x1C) (Terminator)
< Message type: STATUS (125)
< [08 04 82 e4 98 6c]
< Cause (len= 6) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2)
< Ext: 1 Cause: Invalid information element contents (100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 98 (152)
< Cause data 2: 6c (108)
< [14 01 01]>
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Call Initiated (1)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 28/0x1C) (Terminator)
< Message type: SETUP ACKNOWLEDGE (13)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3620 q931_receive: call 32796 on channel 1 enters state 2 (Overlap sending)
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 28/0x1C) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 8a a6]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Network beyond the interworking point (10)
< Ext: 1 Cause: Network out of order (38), class = Network Congestion (resource unavailable) (2) ]
-- Processing IE 8 (cs0, Cause)
q931.c:3561 q931_receive: call 32796 on channel 1 enters state 12 (Disconnect Indication)
-- Channel 0/1, span 1 got hangup request, cause 38
-- Zap/1-1 is circuit-busy
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request
q931.c:2715 q931_release: call 32796 on channel 1 enters state 19 (Release Request)
Quote:
Protocol Discriminator: Q.931 (8) len=9
Call Ref: len= 2 (reference 28/0x1C) (Originator)
Message type: RELEASE (77)
[08 02 81 a6]
Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
Ext: 1 Cause: Network out of order (38), class = Network Congestion (resource unavailable) (2) ]
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'Local/666@test-01c4,2' status is 'CONGESTION'
== Spawn extension (test, 665, 1) exited non-zero on 'SIP/sippuas-0823c430'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 28/0x1C) (Terminator)
< Message type: RELEASE COMPLETE (90)
q931.c:3501 q931_receive: call 32796 on channel 1 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
Von:asterisk-video-bounces@lists.digium.com [mailto:asterisk-video-bounces@lists.digium.com] Im Auftrag von Cihan Aksakal
Gesendet: Freitag, 2. November 2007 11:12
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Sergio,
Nice tool, thank you for the tip.
But we want to make outbound video calls to 3G handsets as well.
And I would prefer to use all components of our system during load tests. Using only Sip would mean, that we won’t use our E1 cards.
Best Regards,
Cihan
Von:asterisk-video-bounces@lists.digium.com [mailto:asterisk-video-bounces@lists.digium.com] Im Auftrag von Sergio Garcia Murillo
Gesendet: Donnerstag, 1. November 2007 23:13
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Subject: [spam][Asterisk-video] Outbound Call / Callout Support
Hi all,
I am currently evaluating how to make h324m outbound calls and need some help.
We have two main objectives:
· We want to make load tests using two asterisk machines with up to 4 E1 ports per machine.
· and outbound calls to 3G handsets.
The outbound call should be connected to an asterisk application which is providing a 3G-dtmf-video-portal using h324m_gw(). Inbound calls to that application using h324m_gw() is working.
Any ideas how to setup such an environment?
Regards,
Cihan Aksakal
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Tue Nov 13, 2007 1:49 pm Post subject: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi,
We have made some mistakes patching asterisk. Now I can initiate a
outbound video call.
I tried to use asterisk as a relay making a inbound call and forwarding
it with a outbound call to a other device. But I get a hangup after
accepting the outbound call.
The logs and conf are attached.
Has anybody successfully made a 3G-324M outbound call and connected two
mobile phones with each other? Or has anybody played a video to a device
connected with a outbound call?
Regards,
Cihan
*** extensions.conf:
[from-pri]
exten => ${PRI}500,1,Noop(Answered connection from ${CALLERID(all)} to
context: ${CONTEXT})
exten => ${PRI}500,n,Answer
exten => ${PRI}500,n,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
exten => ${PRI}500,n,h324m_call(666@test)
Ext: 1 Channel: 2 ]
-- Accepting call from '017621007959' to '221943500' on channel 0/2,
span 1
-- Executing [221943500@from-pri:1] NoOp("Zap/2-1", "Answered
connection from "" <017621007959> to context: from-pri") in new stack
-- Executing [221943500@from-pri:2] Answer("Zap/2-1", "") in new
stack
q931.c:2700 q931_connect: call 884 on channel 2 enters state 8 (Connect
Request)
Ext: 1 Channel: 2 ]
-- Executing [221943500@from-pri:3] NoOp("Zap/2-1", "ul1 is 38") in
new stack
-- Executing [221943500@from-pri:4] h324m_call("Zap/2-1",
"666@test") in new stack
-- Executing [666@test:1] NoOp("Local/666@test-fee3,2", "ul1 is 0")
in new stack
-- Executing [666@test:2] Set("Local/666@test-fee3,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [666@test:3] NoOp("Local/666@test-fee3,2",
"transfer=VIDEO") in new stack
-- Executing [666@test:4] Set("Local/666@test-fee3,2",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [666@test:5] NoOp("Local/666@test-fee3,2", "ul1=38") in
new stack
-- Executing [666@test:6] Dial("Local/666@test-fee3,2",
"Zap/g1/1727054530") in new stack
-- Making new call for cr 32772
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
Quote:
Protocol Discriminator: Q.931 (8) len=44
Call Ref: len= 2 (reference 4/0x4) (Originator)
Message type: SETUP (5)
[04 03 88 90 a6]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Unrestricted digital information (8)
Quote:
Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
Quote:
Ext: 1 User information layer 1: H.223
and H.245 (38)
Quote:
[18 03 a9 83 81]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
Exclusive Dchan: 0
Posted: Tue Nov 13, 2007 10:44 pm Post subject: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Cihan,
In your case you should use or plain Dial comand instead of the h324m_call
or answer the call with h324m_gw and later pass it to h324m_call.
In the first case you'll have asterisk bridging two 3g calls and in the
second you'll have asterisk answering a 3g call and creating a 3g call and
bridge the audio and video between both.
BR
Sergio
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal@viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video@lists.digium.com>
Sent: Tuesday, November 13, 2007 2:41 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Quote:
Hi,
We have made some mistakes patching asterisk. Now I can initiate a
outbound video call.
I tried to use asterisk as a relay making a inbound call and forwarding
it with a outbound call to a other device. But I get a hangup after
accepting the outbound call.
The logs and conf are attached.
Has anybody successfully made a 3G-324M outbound call and connected two
mobile phones with each other? Or has anybody played a video to a device
connected with a outbound call?
Regards,
Cihan
*** extensions.conf:
[from-pri]
exten => ${PRI}500,1,Noop(Answered connection from ${CALLERID(all)} to
context: ${CONTEXT})
exten => ${PRI}500,n,Answer
exten => ${PRI}500,n,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
exten => ${PRI}500,n,h324m_call(666@test)
Any ideas how to trigger an outbound video call and connecting it with an extension to stream or record videos?
Best Regards,
Cihan
-----Ursprüngliche Nachricht-----
Von: asterisk-video-bounces@lists.digium.com [mailto:asterisk-video-bounces@lists.digium.com] Im Auftrag von Sergio Garcia Murillo
Gesendet: Dienstag, 13. November 2007 23:57
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Cihan,
In your case you should use or plain Dial comand instead of the h324m_call
or answer the call with h324m_gw and later pass it to h324m_call.
In the first case you'll have asterisk bridging two 3g calls and in the
second you'll have asterisk answering a 3g call and creating a 3g call and
bridge the audio and video between both.
BR
Sergio
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal@viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video@lists.digium.com>
Sent: Tuesday, November 13, 2007 2:41 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Quote:
Hi,
We have made some mistakes patching asterisk. Now I can initiate a
outbound video call.
I tried to use asterisk as a relay making a inbound call and forwarding
it with a outbound call to a other device. But I get a hangup after
accepting the outbound call.
The logs and conf are attached.
Has anybody successfully made a 3G-324M outbound call and connected two
mobile phones with each other? Or has anybody played a video to a device
connected with a outbound call?
Regards,
Cihan
*** extensions.conf:
[from-pri]
exten => ${PRI}500,1,Noop(Answered connection from ${CALLERID(all)} to
context: ${CONTEXT})
exten => ${PRI}500,n,Answer
exten => ${PRI}500,n,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
exten => ${PRI}500,n,h324m_call(666@test)
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal@viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video@lists.digium.com>
Sent: Wednesday, November 21, 2007 5:03 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Sergio,
I have successfully relayed an inbound video call to another 3G handset
using the following configuration:
Any ideas how to trigger an outbound video call and connecting it with an
extension to stream or record videos?
Best Regards,
Cihan
-----Ursprüngliche Nachricht-----
Von: asterisk-video-bounces@lists.digium.com
[mailto:asterisk-video-bounces@lists.digium.com] Im Auftrag von Sergio
Garcia Murillo
Gesendet: Dienstag, 13. November 2007 23:57
An: Development discussion of video media support in Asterisk
Betreff: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Cihan,
In your case you should use or plain Dial comand instead of the h324m_call
or answer the call with h324m_gw and later pass it to h324m_call.
In the first case you'll have asterisk bridging two 3g calls and in the
second you'll have asterisk answering a 3g call and creating a 3g call and
bridge the audio and video between both.
BR
Sergio
----- Original Message -----
From: "Cihan Aksakal" <cihan.aksakal@viif.de>
To: "Development discussion of video media support in Asterisk"
<asterisk-video@lists.digium.com>
Sent: Tuesday, November 13, 2007 2:41 PM
Subject: Re: [Asterisk-video] [spam] Outbound Call / Callout Support
Quote:
Hi,
We have made some mistakes patching asterisk. Now I can initiate a
outbound video call.
I tried to use asterisk as a relay making a inbound call and forwarding
it with a outbound call to a other device. But I get a hangup after
accepting the outbound call.
The logs and conf are attached.
Has anybody successfully made a 3G-324M outbound call and connected two
mobile phones with each other? Or has anybody played a video to a device
connected with a outbound call?
Regards,
Cihan
*** extensions.conf:
[from-pri]
exten => ${PRI}500,1,Noop(Answered connection from ${CALLERID(all)} to
context: ${CONTEXT})
exten => ${PRI}500,n,Answer
exten => ${PRI}500,n,NoOp(ul1 is ${CHANNEL(userinformationlayer1)})
exten => ${PRI}500,n,h324m_call(666@test)
Posted: Fri Nov 23, 2007 11:01 am Post subject: [Asterisk-video] [spam] Outbound Call / Callout Support
Hi Sergio,
Thank you for the tip. I was already trying to make video outbound calls
using several APIs of asterisk, but without success.
But yesterday we successfully made some video outbound calls and
streamed some videos to a 3G handset.
During further tests we recognized, that in 50 percent of the calls
asterisk hangs up after entering h324m_gw_answer. The second
Noop("Test") after h324m_gw_answer is not executed (logs are atttached).
All configs and commands to test outbound video calls are attached.
BlnAst02*CLI>
-- Making new call for cr 32776
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
Quote:
Protocol Discriminator: Q.931 (8) len=43
Call Ref: len= 2 (reference 8/0x8) (Originator)
Message type: SETUP (5)
[04 03 88 90 a6]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Unrestricted digital information (8)
Quote:
Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
Quote:
Ext: 1 User information layer 1: H.223
and H.245 (38)
Quote:
[18 03 a9 83 81]
Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
Exclusive Dchan: 0
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum