Posted: Thu Jun 23, 2005 5:59 pm Post subject: [Asterisk-Users] HDLC abort 6 error
I've read as much as I can on this error and still can't seem to figure
out what's causing this error:
Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
If I restart my entire machine it will work and assign the D channel
correctly , but after a few minutes it then starts producing this error.
I have changed the second number in my /etc/zaptel.conf span='s line to a
0, as instructed by Digium and still have the same issue. I'm running
Gentoo with plain old 2.6 vanilla sources. My Te110p card is the only
thing on it's irq and when I run a zttest I get all 100% - 99.975586
(lowest). I'm really at a loss here. My card has a solid green light.
It's a Bellsouth PRI 12 -bchannel and 1 dchannel new install. Any ideas,
please help. Thanks.
Posted: Thu Jun 23, 2005 11:33 pm Post subject: [Asterisk-Users] HDLC abort 6 error
Hi,
a common reason for HDLC aborts is interrupt latency/jitter. Most likely
when you are sharing an IRQ, are not using DMA mode for IDE disks or
your IDE controller is disableing all IRQs while it is servicing his
own.
If you have an IDE system please check:
I've read as much as I can on this error and still can't seem to figure
out what's causing this error:
Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event:
HDLC Abort (6) on Primary D-channel of span 1
If I restart my entire machine it will work and assign the D channel
correctly , but after a few minutes it then starts producing this error.
I have changed the second number in my /etc/zaptel.conf span='s line to a
0, as instructed by Digium and still have the same issue. I'm running
Gentoo with plain old 2.6 vanilla sources. My Te110p card is the only
thing on it's irq and when I run a zttest I get all 100% - 99.975586
(lowest). I'm really at a loss here. My card has a solid green light.
It's a Bellsouth PRI 12 -bchannel and 1 dchannel new install. Any ideas,
please help. Thanks.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum