Posted: Mon Aug 23, 2004 2:52 pm Post subject: [Asterisk-bsd] freebsd 4.10 and port misc/zaptel
hey asterisk bsd folk,
i'm new to asterisk, but not to freebsd as i've been using it and
developing on it for quite a few years. we're planning on deploying
asterisk as part of a voip provider's service platform and naturally i'd
rather be using freebsd instead of a linux based distro. as such, i am
very, very excited that there is work going on towards porting the
zaptel drivers to freebsd.
looking at the current cvs copy of the ports though, the zaptel drivers
are at version 0.7, and the Makefile for the port is marked as "requires
FreeBSD 5.x to build", though the Asterisk FreeBSD wiki at
http://www.voip-info.org/wiki-FreeBSD+zaptel and the Changelog at
http://www.portaone.com/~gonzo/ChangeLog say that it can be built on
FreeBSD 4.x
i guess my primary question is, can the ported zaptel drivers work on
4.10 (or 4-STABLE cvsupped a couple of weeks ago) ?
i plan on having asterisk running in a small Pentium III machine with a
Wildcard TDM400P, specifically the TDM40B with 4 FXS ports. my secondary
question would be if i could do this on FreeBSD 4.10 using Asterisk
v0.9.0 and v0.7 of the zaptel port (assuming it can be built on 4.x).
this asterisk implementation will need to talk back to another asterisk
over the WAN using IAX2, if possible as well.
is the above doable ?
many thanx in advance for advice in this area.
--
Regards, /\_/\ "All dogs go to heaven."
dinesh@alphaque.com (0 0) http://www.alphaque.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do |
| for b in clients employers associates relatives neighbours pets; do |
| echo "The opinions here in no way reflect the opinions of my $a $b." |
| done; done |
+=========================================================================+
Posted: Wed Aug 25, 2004 12:49 pm Post subject: [Asterisk-bsd] freebsd 4.10 and port misc/zaptel
The Zaptel port does not work on 4.10 at the moment. Alex is looking into
it. More info will be posted when available.
Chris
----- Original Message -----
From: "Dinesh Nair" <dinesh@alphaque.com>
To: <asterisk-bsd@lists.digium.com>
Sent: Monday, August 23, 2004 7:31 PM
Subject: [Asterisk-bsd] freebsd 4.10 and port misc/zaptel
Quote:
hey asterisk bsd folk,
i'm new to asterisk, but not to freebsd as i've been using it and
developing on it for quite a few years. we're planning on deploying
asterisk as part of a voip provider's service platform and naturally i'd
rather be using freebsd instead of a linux based distro. as such, i am
very, very excited that there is work going on towards porting the
zaptel drivers to freebsd.
looking at the current cvs copy of the ports though, the zaptel drivers
are at version 0.7, and the Makefile for the port is marked as "requires
FreeBSD 5.x to build", though the Asterisk FreeBSD wiki at
http://www.voip-info.org/wiki-FreeBSD+zaptel and the Changelog at
http://www.portaone.com/~gonzo/ChangeLog say that it can be built on
FreeBSD 4.x
i guess my primary question is, can the ported zaptel drivers work on
4.10 (or 4-STABLE cvsupped a couple of weeks ago) ?
i plan on having asterisk running in a small Pentium III machine with a
Wildcard TDM400P, specifically the TDM40B with 4 FXS ports. my secondary
question would be if i could do this on FreeBSD 4.10 using Asterisk
v0.9.0 and v0.7 of the zaptel port (assuming it can be built on 4.x).
this asterisk implementation will need to talk back to another asterisk
over the WAN using IAX2, if possible as well.
Posted: Wed Aug 25, 2004 10:07 pm Post subject: [Asterisk-bsd] freebsd 4.10 and port misc/zaptel
On 26/08/2004 04:49 Chris Stenton said the following:
Quote:
The Zaptel port does not work on 4.10 at the moment. Alex is looking into
it. More info will be posted when available.
i removed the FreeBSD 5.0 release check in
/usr/ports/misc/zaptel/Makefile, and the zaptel drivers compiled and
installed without fuss. i've also managed to kldload the modules without
incident. however, since i do not actually have any digium cards to test
with (awaiting shipping), i don't know if the modules work. i'd be
willing to assist in any way i can on this, including testing betas and
development versions of the driver for the 4-STABLE line. alex/chris,
you know where to reach me. :)
--
Regards, /\_/\ "All dogs go to heaven."
dinesh@alphaque.com (0 0) http://www.alphaque.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do |
| for b in clients employers associates relatives neighbours pets; do |
| echo "The opinions here in no way reflect the opinions of my $a $b." |
| done; done |
+=========================================================================+
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum