Posted: Sat Dec 10, 2005 8:19 am Post subject: [Asterisk-Users] Via Epia
Hi,
Does anyone has some experience in installing * on Via Epia. I am
struggling with it for about two days. And when I finally managed to
install asterisk 1.0.9 after starting it I get this error or whatever:
----- > Illegal instruction
I changed the variable in makefile to i586 (I also tried i686 because
that is what my uname - m says) but still I get the same problem.
I use Debian with 2.4.30 kernel.
Does anyone has some experience with Via Epia and Asterisk. Will this
mix work in appropriate way ;) ?
Cheers
Andrew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sat Dec 10, 2005 11:37 am Post subject: [Asterisk-Users] Via Epia
Quote:
Does anyone has some experience in installing * on Via Epia. I am
struggling with it for about two days. And when I finally managed to
install asterisk 1.0.9 after starting it I get this error or whatever:
----- > Illegal instruction
I changed the variable in makefile to i586 (I also tried i686 because
that is what my uname - m says) but still I get the same problem.
I use Debian with 2.4.30 kernel.
Does anyone has some experience with Via Epia and Asterisk. Will this
mix work in appropriate way ;) ?
There is not only 1 makefile where you have to define i586.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sat Dec 10, 2005 11:57 am Post subject: [Asterisk-Users] Via Epia
Aha!
I was getting the same error and could not figure out why.
My CPU is a VIA Samuel.
So it's a VIA thing??
Roger
Andrew Nowrot wrote:
Quote:
Hi,
Does anyone has some experience in installing * on Via Epia. I am
struggling with it for about two days. And when I finally managed to
install asterisk 1.0.9 after starting it I get this error or whatever:
----- > Illegal instruction
I changed the variable in makefile to i586 (I also tried i686 because
that is what my uname - m says) but still I get the same problem.
I use Debian with 2.4.30 kernel.
Does anyone has some experience with Via Epia and Asterisk. Will this
mix work in appropriate way ;) ?
Cheers
Andrew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
--
########################################################
Roger Hill 07739 707 180
Perseverance is the hard work you do after you get
tired of doing the hard work you already did.
########################################################
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sat Dec 10, 2005 1:42 pm Post subject: [Asterisk-Users] Via Epia
After reading the first post, I went back into the makefile, and
PROC=i586. (only in the one place, top level makefile)
Mine now works! No more 'illegal instruction'.
Roger
Roger Hill wrote:
Quote:
Aha!
I was getting the same error and could not figure out why.
My CPU is a VIA Samuel.
So it's a VIA thing??
Roger
Andrew Nowrot wrote:
> Hi,
>
> Does anyone has some experience in installing * on Via Epia. I am
> struggling with it for about two days. And when I finally managed to
> install asterisk 1.0.9 after starting it I get this error or whatever:
>
> ----- > Illegal instruction
>
> I changed the variable in makefile to i586 (I also tried i686 because
> that is what my uname - m says) but still I get the same problem.
>
> I use Debian with 2.4.30 kernel.
>
> Does anyone has some experience with Via Epia and Asterisk. Will this
> mix work in appropriate way ;) ?
>
> Cheers
>
> Andrew
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
--
########################################################
Roger Hill 07739 707 180
Perseverance is the hard work you do after you get
tired of doing the hard work you already did.
########################################################
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
On Sat, 2005-12-10 at 12:36 +0100, Maciej Kietlinski wrote:
Quote:
Quote:
Quote:
Does anyone has some experience in installing * on Via Epia. I am
struggling with it for about two days. And when I finally managed to
install asterisk 1.0.9 after starting it I get this error or whatever:
----- > Illegal instruction
I changed the variable in makefile to i586 (I also tried i686 because
that is what my uname - m says) but still I get the same problem.
I use Debian with 2.4.30 kernel.
Does anyone has some experience with Via Epia and Asterisk. Will this
mix work in appropriate way ;) ?
There is not only 1 makefile where you have to define i586.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
On Sat, 2005-12-10 at 11:57 +0000, Roger Hill wrote:
Quote:
Quote:
Aha!
I was getting the same error and could not figure out why.
My CPU is a VIA Samuel.
So it's a VIA thing??
Roger
Andrew Nowrot wrote:
Quote:
Hi,
Does anyone has some experience in installing * on Via Epia. I am
struggling with it for about two days. And when I finally managed to
install asterisk 1.0.9 after starting it I get this error or whatever:
----- > Illegal instruction
I changed the variable in makefile to i586 (I also tried i686 because
that is what my uname - m says) but still I get the same problem.
I use Debian with 2.4.30 kernel.
Does anyone has some experience with Via Epia and Asterisk. Will this
mix work in appropriate way ;) ?
Cheers
Andrew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sat Dec 10, 2005 3:55 pm Post subject: [Asterisk-Users] Via Epia
Hi,
Could you specify the amount of makefiles because I use * from
Bristuff and only changed the makefile in asterisk directory. What
others makefiles should I change?
Andrew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sat Dec 10, 2005 9:48 pm Post subject: [Asterisk-Users] Via Epia
Hi,
I use VIA-C3 Processor family for ezra CPU. Does it make my situation
any better? I managed to compile a new kernel 2.4.30 on this Via Epia.
I have also installed Asterisk with no problems but the after the
start I get --> illegal instruction 8(.
If the PROC=i5(6)86 will not change anything what should I do make * run?
Cheers
Andrew
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Posted: Sun Dec 11, 2005 9:21 am Post subject: [Asterisk-Users] Via Epia
On Sat, Dec 10, 2005 at 10:47:32PM +0100, Andrew Nowrot wrote:
Quote:
Hi,
I use VIA-C3 Processor family for ezra CPU. Does it make my situation
any better? I managed to compile a new kernel 2.4.30 on this Via Epia.
I have also installed Asterisk with no problems but the after the
start I get --> illegal instruction 8(.
If the PROC=i5(6)86 will not change anything what should I do make * run?
As others have written toyou, and as it says in the link above, the CPU
type does matter. e.g: have you tried the default Debian packages (built
for i386)?
PROC=i586 should work for you. If you still get illegal instruction
errors, make sure you don't have older modules lurking.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum