Posted: Sun Apr 30, 2006 5:29 am Post subject: [Asterisk-Users] problame with outbound calls on pri
Hi. recently I have been trying to setup a PRI on asterisk. Inbound
calls are working just fine but I am not able to make outbound
calls. Does anyone know what I need to change to make outbound
calls work? Right now the PRI is instantly hanging up on the outbound calls.
I have included full debug info as well as config files.
Posted: Sun Apr 30, 2006 8:31 am Post subject: [Asterisk-Users] problame with outbound calls on pri
Are you sure it should be 4ess switchtype? Have you tried national? Is
it only on 1800/toll free numbers? Pridialplan=unknown, have you tried
anything different for this value?
I can dial into my T3 just fine but I cannot dial out to toll free or
911. Any regular toll call out works, local or longdistance.
There are a couple strange things in your debug:
Called Number (len=10) [ Ext: 1 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0) '18005551212' ]
-- Channel 0/1, span 1 received AOC-E charging 0 units
Thanks,
Steve
Doug Langley wrote:
Quote:
Hi. recently I have been trying to setup a PRI on asterisk. Inbound
calls are working just fine but I am not able to make outbound calls.
Does anyone know what I need to change to make outbound calls work?
Right now the PRI is instantly hanging up on the outbound calls.
I have included full debug info as well as config files.
Posted: Sun Apr 30, 2006 4:03 pm Post subject: [Asterisk-Users] problame with outbound calls on pri
Have you tried switchtype=national ?
Doug Langley wrote:
Quote:
Hi. recently I have been trying to setup a PRI on asterisk. Inbound
calls are working just fine but I am not able to make outbound calls.
Does anyone know what I need to change to make outbound calls work?
Right now the PRI is instantly hanging up on the outbound calls.
I have included full debug info as well as config files.
relevant portions of zapata.conf:
[trunkgroups]
[channels]
language=en
context=from-pstn
pridialplan=unknown
signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
;signaling=em_w
switchtype=4ess
group=0
channel => 1-23
debug info:
-- Executing Dial("SIP/202-2d92", "zap/g0/18005551212") in new stack
-- Making new call for cr 32771
-- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8) len=48
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> [04 02 80 90]
> Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
> Ext: 0 User information layer 1:
Unknown (24)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
> Ext: 1 Channel: 1 ]
> [28 0f b1 74 65 73 74 20 65 78 74 65 6e 73 69 6f 6e]
> Display (len=15) Charset: 31 [ test extension ]
> [6c 05 21 83 32 30 32]
> Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation allowed of
network provided number (3) '202' ]
> [70 08 80 33 38 31 36 30 36 38]
> Called Number (len=10) [ Ext: 1 TON: Unknown Number Type (0) NPI:
Unknown Number Plan (0) '18005551212' ]
-- Called g0/18005551212
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 83 e0 20]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Transit network (3)
< Ext: 1 Cause: Unknown (96), class = Protocol Error
(6) ]
< Cause data 1: 20 (32)
-- Processing IE 8 (cs0, Cause)
-- Channel 0/1, span 1 got hangup
-- Channel 0/1, span 1 received AOC-E charging 0 units
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
--
Now accepting new clients in Birmingham, Atlanta, Huntsville,
Chattanooga, and Montgomery.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum