Posted: Sat Sep 01, 2007 5:46 pm Post subject: [Asterisk-bsd] TDM400P - odd issues
Hi,
I'm running a TDM400P with 2xFXS and 1xFXO on an AMD64 dual-core
machine (Nvidia chipset motherboard) running in i386 mode on FreeBSD
6.2. I had been experiencing intermittent problems with the TDM400
setup. The old problem I used to see was that channel 2 (2nd FXS)
would have battery but no dialtone, and channel 4 (FXO) would be able
to place outbound calls, but would miss incoming rings/callerid and
not pickup. Channel 1 (FXS) would work just fine. This used to
happen every few weeks. Recently, it was happening every few days,
before the new problem cropped up...
Today, my wife reported an even weirder problem: any attempts to use
the FXO would result in really loud static/noise after the FXS was
joined to the FXO, and a the outbound dialing did not occur. I
checked, and the analog line works perfectly.
Here's what I've tried:
- I tried a power cycle. Same problem.
- I upgraded the zaptel driver to the latest port (1.4.6) and
asterisk. Same problem.
- I upgraded asterisk. Same problem.
Unfortunately, I can't recall what previous port versions I had
installed, but they weren't very old, and the first problem persisted
through several versions of the ports for both asterisk and the
zaptel driver.
I now have:
# Installed ports
asterisk-1.4.9_1 An Open Source PBX and telephony toolkit
zaptel-1.4.6_2 A FreeBSD Driver for FXO, FXS, BRI and PRI
Telephony Cards
asterisk-addons-1.4.2 GPL modules for the Asterisk Open Source PBX
Posted: Sun Sep 02, 2007 5:50 pm Post subject: [Asterisk-bsd] TDM400P - odd issues
Update: Nothing on the FreeBSD side made it work. Linux (Ubuntu
server with Zaptel 1.4.5.1) worked fine the first time.
I'm at a loss as to what I might be able to do to try to move back to
FreeBSD.
Cheers,
Roy
On 1-Sep-07, at 1:36 PM, Roy Hooper wrote:
Quote:
Hi,
I'm running a TDM400P with 2xFXS and 1xFXO on an AMD64 dual-core
machine (Nvidia chipset motherboard) running in i386 mode on FreeBSD
6.2. I had been experiencing intermittent problems with the TDM400
setup. The old problem I used to see was that channel 2 (2nd FXS)
would have battery but no dialtone, and channel 4 (FXO) would be able
to place outbound calls, but would miss incoming rings/callerid and
not pickup. Channel 1 (FXS) would work just fine. This used to
happen every few weeks. Recently, it was happening every few days,
before the new problem cropped up...
Today, my wife reported an even weirder problem: any attempts to use
the FXO would result in really loud static/noise after the FXS was
joined to the FXO, and a the outbound dialing did not occur. I
checked, and the analog line works perfectly.
Here's what I've tried:
- I tried a power cycle. Same problem.
- I upgraded the zaptel driver to the latest port (1.4.6) and
asterisk. Same problem.
- I upgraded asterisk. Same problem.
Unfortunately, I can't recall what previous port versions I had
installed, but they weren't very old, and the first problem persisted
through several versions of the ports for both asterisk and the
zaptel driver.
I now have:
# Installed ports
asterisk-1.4.9_1 An Open Source PBX and telephony toolkit
zaptel-1.4.6_2 A FreeBSD Driver for FXO, FXS, BRI and PRI
Telephony Cards
asterisk-addons-1.4.2 GPL modules for the Asterisk Open Source PBX
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum