I have tested against asterisk 1.4.11 and 1.4.13.
The calls sometime disconnected in the middle of call
setup, for call-in after invoked
Dial(SIP/1005@openser).
And as for call-out, the call disconnected after
CONNECTION ACKNOWLEDGED state.
Also for the call-in against asterisk 1.4.13 i still
can't make it. The calls always disconnected after
Dial(SIP/1005@openser), only call-out works.
Below some logs from 1.4.13:
----------------------------
Received out of order SRP_NSRP_RESPONSE [5]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
Active, peerstate Active
q931.c:2798 q931_disconnect: call 101 on channel 23
enters state 11 (Disconnect Request)
____________________________________________________________________________________
Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more!
http://tv.yahoo.com/collections/3658
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Wed Oct 17, 2007 8:02 pm Post subject: [Asterisk-video] Disconnect Request Problem
It would be good if you could send me the h245.log, also it's the behaviour
simillar with different brands of mobile phones?
BR
Sergio
----- Original Message -----
From: "Reza Fatahillah" <ezhot_95@yahoo.com>
To: <asterisk-video@lists.digium.com>
Sent: Wednesday, October 17, 2007 5:26 AM
Subject: [Asterisk-video] Disconnect Request Problem
Quote:
Hi,
I still have problem with Disconnect Request, when
doing call setup.
Here are my extension.conf snippet
I have tested against asterisk 1.4.11 and 1.4.13.
The calls sometime disconnected in the middle of call
setup, for call-in after invoked
Dial(SIP/1005@openser).
And as for call-out, the call disconnected after
CONNECTION ACKNOWLEDGED state.
Also for the call-in against asterisk 1.4.13 i still
can't make it. The calls always disconnected after
Dial(SIP/1005@openser), only call-out works.
Below some logs from 1.4.13:
----------------------------
Received out of order SRP_NSRP_RESPONSE [5]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
Active, peerstate Active
q931.c:2798 q931_disconnect: call 101 on channel 23
enters state 11 (Disconnect Request)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 101/0x65) (Terminator)
> Message type: DISCONNECT (69)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU)
standard (0) Spare: 0 Location: Private network
serving the local user (1)
> Ext: 1 Cause: Normal Clearing
(16), class = Normal Event (1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
Active, peerstate Active
q931.c:2798 q931_disconnect: call 101 on channel 23
enters state 11 (Disconnect Request)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 101/0x65) (Terminator)
It would be good if you could send me the h245.log, also it's the behaviour
simillar with different brands of mobile phones?
BR
Sergio
----- Original Message -----
From: "Reza Fatahillah" <ezhot_95@yahoo.com>
To: <asterisk-video@lists.digium.com>
Sent: Wednesday, October 17, 2007 5:26 AM
Subject: [Asterisk-video] Disconnect Request Problem
> Hi,
>
> I still have problem with Disconnect Request, when
> doing call setup.
> Here are my extension.conf snippet
>
> [from-zaptel]
> exten => s,1,h324m_gw(call@sipphone)
>
> [sipphone]
> exten => call,1,h324m_gw_answer()
> exten => call,n,Dial(SIP/1005@openser)
>
> [sipout]
> exten => _X.,1,Set(GLOBAL(number)=${EXTEN})
> exten => _X.,2,h324m_call(_X.@threegvideo)
>
> [threegvideo]
> exten => _X.,1,Set(CHANNEL(transfercapability)=VIDEO)
> exten => _X.,n,Dial(Zap/g0/${number})
>
> I have tested against asterisk 1.4.11 and 1.4.13.
> The calls sometime disconnected in the middle of call
> setup, for call-in after invoked
> Dial(SIP/1005@openser).
> And as for call-out, the call disconnected after
> CONNECTION ACKNOWLEDGED state.
>
> Also for the call-in against asterisk 1.4.13 i still
> can't make it. The calls always disconnected after
> Dial(SIP/1005@openser), only call-out works.
> Below some logs from 1.4.13:
> ----------------------------
> Received out of order SRP_NSRP_RESPONSE [5]
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
> Active, peerstate Active
> q931.c:2798 q931_disconnect: call 101 on channel 23
> enters state 11 (Disconnect Request)
>> Protocol Discriminator: Q.931 (8) len=9
>> Call Ref: len= 2 (reference 101/0x65) (Terminator)
>> Message type: DISCONNECT (69)
>> [08 02 81 90]
>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU)
> standard (0) Spare: 0 Location: Private network
> serving the local user (1)
>> Ext: 1 Cause: Normal Clearing
> (16), class = Normal Event (1) ]
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate
> Active, peerstate Active
> q931.c:2798 q931_disconnect: call 101 on channel 23
> enters state 11 (Disconnect Request)
>> Protocol Discriminator: Q.931 (8) len=9
>> Call Ref: len= 2 (reference 101/0x65) (Terminator)
>
> Let me know if you need more info.
>
> Regards,
> Reza
>
>
>
____________________________________________________________________________
________
> Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get
listings, and more!
> http://tv.yahoo.com/collections/3658
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Thu Oct 18, 2007 11:14 am Post subject: [Asterisk-video] Disconnect Request Problem
Hi,
Additional info, all call disconnected at the state
where something like "wait for image" (shown in nokia
vodafone 702NKII) or "connected"(shown in motorola
A1000) appeared on screen.
Regards,
Reza
--- Klaus Darilion <klaus.mailinglists@pernau.at>
wrote:
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum