Posted: Mon May 25, 2009 8:53 pm Post subject: [asterisk-users] Placing a MWI on-off call...
My grateful thanks to whoever can guide me in implementing this...
I have a need to place calls via Asterisk Manager Protocol to a legacy PBX and twiddle its MWI lights.
By some means I get notified that an MWI light has to be changed.
Via AMP:
1. Send an ORIGINATE command honking up an incoming port on the PBX via a TA804.
a. I presume that the TA804 should be a SIP channel. yes/no?
b. The local extension I have made a pseudo extension that answers and plays a silent file. Sensible?
2. loop calling Play_DTMF and maybe silence between, to the SIP channel to do the digits.
3. Need to sense fast-busy or stutter-dial-tone at this point. Any pointers?
4. Hangup said SIP channel.
My grateful thanks to whoever can guide me in implementing this...
I have a need to place calls via Asterisk Manager Protocol to a legacy PBX
How are both boxes connected ?
Quote:
and twiddle its MWI lights.
Which manage the phones you're talking about ?
Quote:
By some means I get notified that an MWI light has to be changed.
Via AMP:
1. Send an ORIGINATE command honking up an incoming port on the PBX via a TA804.
a. I presume that the TA804 should be a SIP channel. yes/no?
b. The local extension I have made a pseudo extension that answers and plays a silent file. Sensible?
2. loop calling Play_DTMF and maybe silence between, to the SIP channel to do the digits.
3. Need to sense fast-busy or stutter-dial-tone at this point. Any pointers?
4. Hangup said SIP channel.
Thanks in advance, etc.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum