;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
- ; ALSA channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The ALSA channel can't accept jitter,
- ; thus an enabled jitterbuffer on the receive ALSA side will always
- ; be used if the sending side can create jitter.
+; ALSA channel. Defaults to "no". An enabled jitterbuffer will
+; be used only if the sending side can create and the receiving
+; side can not accept jitter. The ALSA channel can't accept jitter,
+; thus an enabled jitterbuffer on the receive ALSA side will always
+; be used if the sending side can create jitter.
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
+; resynchronized. Useful to improve the quality of the voice, with
+; big jumps in/broken timestamps, usually sent from exotic devices
+; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a SIP
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
+; channel. Two implementations are currently available - "fixed"
+; (with size always equals to jbmax-size) and "adaptive" (with
+; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
[general]
initial_silence = 2500 ; Maximum silence duration before the greeting.
- ; If exceeded then MACHINE.
+; If exceeded then MACHINE.
greeting = 1500 ; Maximum length of a greeting. If exceeded then MACHINE.
after_greeting_silence = 800 ; Silence after detecting a greeting.
- ; If exceeded then HUMAN
+; If exceeded then HUMAN
total_analysis_time = 5000 ; Maximum time allowed for the algorithm to decide
- ; on a HUMAN or MACHINE
+; on a HUMAN or MACHINE
min_word_length = 100 ; Minimum duration of Voice to considered as a word
between_words_silence = 50 ; Minimum duration of silence after a word to consider
- ; the audio what follows as a new word
+; the audio what follows as a new word
maximum_number_of_words = 3 ; Maximum number of words in the greeting.
- ; If exceeded then MACHINE
+; If exceeded then MACHINE
silence_threshold = 256
KEY "vmail" IS "VMail" OR "Voicemail"
- SENDDTMF "8500"
+SENDDTMF "8500"
ENDKEY
KEY "backspace" IS "BackSpc" OR "Backspace"
- BACKSPACE
+BACKSPACE
ENDKEY
KEY "cwdisable" IS "CWDsble" OR "Disable Call Wait"
- SENDDTMF "*70"
- SETFLAG "nocallwaiting"
- SHOWDISPLAY "cwdisabled" AT 4
- TIMERCLEAR
- TIMERSTART 1
+SENDDTMF "*70"
+SETFLAG "nocallwaiting"
+SHOWDISPLAY "cwdisabled" AT 4
+TIMERCLEAR
+TIMERSTART 1
ENDKEY
KEY "cidblock" IS "CIDBlk" OR "Block Callerid"
- SENDDTMF "*67"
- SETFLAG "nocallwaiting"
+SENDDTMF "*67"
+SETFLAG "nocallwaiting"
ENDKEY
;
@@ -75,85 +75,85 @@
;
SUB "main" IS
- IFEVENT NEARANSWER THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1 NOUPDATE
- SHOWDISPLAY "talkingto" AT 2 NOUPDATE
- SHOWDISPLAY "callname" AT 3
- SHOWDISPLAY "callnum" AT 4
- GOTO "stableCall"
- ENDIF
- IFEVENT OFFHOOK THEN
- CLEAR
- CLEARFLAG "nocallwaiting"
- CLEARDISPLAY
- SHOWDISPLAY "titles" AT 1
- SHOWKEYS "vmail"
- SHOWKEYS "cidblock"
- SHOWKEYS "cwdisable" UNLESS "nocallwaiting"
- GOTO "offHook"
- ENDIF
- IFEVENT IDLE THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1
- SHOWKEYS "vmail_OH"
- ENDIF
- IFEVENT CALLERID THEN
- CLEAR
+IFEVENT NEARANSWER THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1 NOUPDATE
+SHOWDISPLAY "talkingto" AT 2 NOUPDATE
+SHOWDISPLAY "callname" AT 3
+SHOWDISPLAY "callnum" AT 4
+GOTO "stableCall"
+ENDIF
+IFEVENT OFFHOOK THEN
+CLEAR
+CLEARFLAG "nocallwaiting"
+CLEARDISPLAY
+SHOWDISPLAY "titles" AT 1
+SHOWKEYS "vmail"
+SHOWKEYS "cidblock"
+SHOWKEYS "cwdisable" UNLESS "nocallwaiting"
+GOTO "offHook"
+ENDIF
+IFEVENT IDLE THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1
+SHOWKEYS "vmail_OH"
+ENDIF
+IFEVENT CALLERID THEN
+CLEAR
; SHOWDISPLAY "titles" AT 1 NOUPDATE
; SHOWDISPLAY "incoming" AT 2 NOUPDATE
- SHOWDISPLAY "callname" AT 3 NOUPDATE
- SHOWDISPLAY "callnum" AT 4
- ENDIF
- IFEVENT RING THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1 NOUPDATE
- SHOWDISPLAY "incoming" AT 2
- ENDIF
- IFEVENT ENDOFRING THEN
- SHOWDISPLAY "missedcall" AT 2
- CLEAR
- SHOWDISPLAY "titles" AT 1
- SHOWKEYS "vmail_OH"
- ENDIF
- IFEVENT TIMER THEN
- CLEAR
- SHOWDISPLAY "empty" AT 4
- ENDIF
+SHOWDISPLAY "callname" AT 3 NOUPDATE
+SHOWDISPLAY "callnum" AT 4
+ENDIF
+IFEVENT RING THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1 NOUPDATE
+SHOWDISPLAY "incoming" AT 2
+ENDIF
+IFEVENT ENDOFRING THEN
+SHOWDISPLAY "missedcall" AT 2
+CLEAR
+SHOWDISPLAY "titles" AT 1
+SHOWKEYS "vmail_OH"
+ENDIF
+IFEVENT TIMER THEN
+CLEAR
+SHOWDISPLAY "empty" AT 4
+ENDIF
ENDSUB
SUB "offHook" IS
- IFEVENT FARRING THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1 NOUPDATE
- SHOWDISPLAY "ringing" AT 2 NOUPDATE
- SHOWDISPLAY "callname" at 3 NOUPDATE
- SHOWDISPLAY "callnum" at 4
- ENDIF
- IFEVENT FARANSWER THEN
- CLEAR
- SHOWDISPLAY "talkingto" AT 2
- GOTO "stableCall"
- ENDIF
- IFEVENT BUSY THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1 NOUPDATE
- SHOWDISPLAY "busy" AT 2 NOUPDATE
- SHOWDISPLAY "callname" at 3 NOUPDATE
- SHOWDISPLAY "callnum" at 4
- ENDIF
- IFEVENT REORDER THEN
- CLEAR
- SHOWDISPLAY "titles" AT 1 NOUPDATE
- SHOWDISPLAY "reorder" AT 2 NOUPDATE
- SHOWDISPLAY "callname" at 3 NOUPDATE
- SHOWDISPLAY "callnum" at 4
- ENDIF
+IFEVENT FARRING THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1 NOUPDATE
+SHOWDISPLAY "ringing" AT 2 NOUPDATE
+SHOWDISPLAY "callname" at 3 NOUPDATE
+SHOWDISPLAY "callnum" at 4
+ENDIF
+IFEVENT FARANSWER THEN
+CLEAR
+SHOWDISPLAY "talkingto" AT 2
+GOTO "stableCall"
+ENDIF
+IFEVENT BUSY THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1 NOUPDATE
+SHOWDISPLAY "busy" AT 2 NOUPDATE
+SHOWDISPLAY "callname" at 3 NOUPDATE
+SHOWDISPLAY "callnum" at 4
+ENDIF
+IFEVENT REORDER THEN
+CLEAR
+SHOWDISPLAY "titles" AT 1 NOUPDATE
+SHOWDISPLAY "reorder" AT 2 NOUPDATE
+SHOWDISPLAY "callname" at 3 NOUPDATE
+SHOWDISPLAY "callnum" at 4
+ENDIF
ENDSUB
SUB "stableCall" IS
- IFEVENT REORDER THEN
- SHOWDISPLAY "callended" AT 2
- ENDIF
+IFEVENT REORDER THEN
+SHOWDISPLAY "callended" AT 2
+ENDIF
ENDSUB
Modified: trunk/configs/chan_dahdi.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/trunk/configs/chan_dahdi.conf.sample?view=diff&rev=197528&r1=197527&r2=197528
==============================================================================
--- trunk/configs/chan_dahdi.conf.sample (original)
+++ trunk/configs/chan_dahdi.conf.sample Thu May 28 09:32:03 2009
@@ -581,9 +581,9 @@
; Channel variable to be set for all calls from this channel
;setvar=CHANNEL=42
;setvar=ATTENDED_TRANSFER_COMPLETE_SOUND=beep ; This channel variable will
- ; cause the given audio file to
- ; be played upon completion of
- ; an attended transfer.
+; cause the given audio file to
+; be played upon completion of
+; an attended transfer.
;
; Specify whether the channel should be answered immediately or if the simple
@@ -792,23 +792,23 @@
;
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
- ; DAHDI channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The DAHDI channel can't accept jitter,
- ; thus an enabled jitterbuffer on the receive DAHDI side will always
- ; be used if the sending side can create jitter.
+; DAHDI channel. Defaults to "no". An enabled jitterbuffer will
+; be used only if the sending side can create and the receiving
+; side can not accept jitter. The DAHDI channel can't accept jitter,
+; thus an enabled jitterbuffer on the receive DAHDI side will always
+; be used if the sending side can create jitter.
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
+; resynchronized. Useful to improve the quality of the voice, with
+; big jumps in/broken timestamps, usually sent from exotic devices
+; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a DAHDI
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
+; channel. Two implementations are currently available - "fixed"
+; (with size always equals to jbmax-size) and "adaptive" (with
+; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
Modified: trunk/configs/cli_aliases.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/trunk/configs/cli_aliases.conf.sample?view=diff&rev=197528&r1=197527&r2=197528
==============================================================================
--- trunk/configs/cli_aliases.conf.sample (original)
+++ trunk/configs/cli_aliases.conf.sample Thu May 28 09:32:03 2009
@@ -13,8 +13,8 @@
;template = asterisk12 ; Asterisk 1.2 style syntax
;template = asterisk14 ; Asterisk 1.4 style syntax
;template = individual_custom ; see [individual_custom] example below which
- ; includes a list of aliases from an external
- ; file
+; includes a list of aliases from an external
+; file
; Because the Asterisk CLI syntax follows a "module verb argument" syntax,
default_perm=permit ; To leave asterisk working as normal
- ; we should set this parameter to 'permit'
+; we should set this parameter to 'permit'
;
; Follows the per-users permissions configs.
;
Modified: trunk/configs/console.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/trunk/configs/console.conf.sample?view=diff&rev=197528&r1=197527&r2=197528
==============================================================================
--- trunk/configs/console.conf.sample (original)
+++ trunk/configs/console.conf.sample Thu May 28 09:32:03 2009
@@ -34,7 +34,7 @@
; The default is "no".
;
;overridecontext = no ; if 'no', the last @ will start the context
- ; if 'yes' the whole string is an extension.
+; if 'yes' the whole string is an extension.
; Default Music on Hold class to use when this channel is placed on hold in
@@ -46,23 +46,23 @@
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
- ; Console channel. Defaults to "no". An enabled jitterbuffer will
- ; be used only if the sending side can create and the receiving
- ; side can not accept jitter. The Console channel can't accept jitter,
- ; thus an enabled jitterbuffer on the receive Console side will always
- ; be used if the sending side can create jitter.
+; Console channel. Defaults to "no". An enabled jitterbuffer will
+; be used only if the sending side can create and the receiving
+; side can not accept jitter. The Console channel can't accept jitter,
+; thus an enabled jitterbuffer on the receive Console side will always
+; be used if the sending side can create jitter.
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
- ; resynchronized. Useful to improve the quality of the voice, with
- ; big jumps in/broken timestamps, usually sent from exotic devices
- ; and programs. Defaults to 1000.
+; resynchronized. Useful to improve the quality of the voice, with
+; big jumps in/broken timestamps, usually sent from exotic devices
+; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a Console
- ; channel. Two implementations are currently available - "fixed"
- ; (with size always equals to jbmax-size) and "adaptive" (with
- ; variable size, actually the new jb of IAX2). Defaults to fixed.
+; channel. Two implementations are currently available - "fixed"
+; (with size always equals to jbmax-size) and "adaptive" (with
+; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
@@ -76,8 +76,8 @@
[default]
input_device = default ; When configuring an input device and output device,
output_device = default ; use the name that you see when you run the "console
- ; list available" CLI command. If you say "default", the
- ; system default input and output devices will be used.
+; list available" CLI command. If you say "default", the
+; system default input and output devices will be used.
autoanswer = no
context = default
extension = s
@@ -86,5 +86,5 @@
overridecontext = no
mohinterpret = default
active = yes ; This option should only be set for one console.
- ; It means that it is the active console to be
- ; used from the Asterisk CLI.
+; It means that it is the active console to be
+; used from the Asterisk CLI.
Modified: trunk/configs/dnsmgr.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/trunk/configs/dnsmgr.conf.sample?view=diff&rev=197528&r1=197527&r2=197528
==============================================================================
--- trunk/configs/dnsmgr.conf.sample (original)
+++ trunk/configs/dnsmgr.conf.sample Thu May 28 09:32:03 2009
@@ -1,5 +1,5 @@
[general]
;enable=yes ; enable creation of managed DNS lookups
- ; default is 'no'
+; default is 'no'
;refreshinterval=1200 ; refresh managed DNS lookups every <n> seconds
- ; default is 300 (5 minutes)
+; default is 300 (5 minutes)
globals {
- CONSOLE="Console/dsp"; // Console interface for demo
- //CONSOLE=DAHDI/1
- //CONSOLE=Phone/phone0
- IAXINFO=guest; // IAXtel username/password
- //IAXINFO="myuser:mypass";
- TRUNK="DAHDI/G2"; // Trunk interface
- //
- // Note the 'G2' in the TRUNK variable above. It specifies which group (defined
- // in dahdi.conf) to dial, i.e. group 2, and how to choose a channel to use in
- // the specified group. The four possible options are:
- //
- // g: select the lowest-numbered non-busy DAHDI channel
- // (aka. ascending sequential hunt group).
- // G: select the highest-numbered non-busy DAHDI channel
- // (aka. descending sequential hunt group).
- // r: use a round-robin search, starting at the next highest channel than last
- // time (aka. ascending rotary hunt group).
- // R: use a round-robin search, starting at the next lowest channel than last
- // time (aka. descending rotary hunt group).
- //
- TRUNKMSD=1; // MSD digits to strip (usually 1 or 0)
- //TRUNK=IAX2/user:pass@provider
+CONSOLE="Console/dsp"; // Console interface for demo
+//CONSOLE=DAHDI/1
+//CONSOLE=Phone/phone0
+IAXINFO=guest; // IAXtel username/password
+//IAXINFO="myuser:mypass";
+TRUNK="DAHDI/G2"; // Trunk interface
+//
+// Note the 'G2' in the TRUNK variable above. It specifies which group (defined
+// in dahdi.conf) to dial, i.e. group 2, and how to choose a channel to use in
+// the specified group. The four possible options are:
+//
+// g: select the lowest-numbered non-busy DAHDI channel
+// (aka. ascending sequential hunt group).
+// G: select the highest-numbered non-busy DAHDI channel
+// (aka. descending sequential hunt group).
+// r: use a round-robin search, starting at the next highest channel than last
+// time (aka. ascending rotary hunt group).
+// R: use a round-robin search, starting at the next lowest channel than last
+// time (aka. descending rotary hunt group).
+//
+TRUNKMSD=1; // MSD digits to strip (usually 1 or 0)
+//TRUNK=IAX2/user:pass@provider
};
context ael-dundi-e164-customers {
- //
- // If you are an ITSP or Reseller, list your customers here.
- //
- //_12564286000 => Dial(SIP/customer1);
- //_12564286001 => Dial(IAX2/customer2);
+//
+// If you are an ITSP or Reseller, list your customers here.
+//
+//_12564286000 => Dial(SIP/customer1);
+//_12564286001 => Dial(IAX2/customer2);
};
context ael-dundi-e164-via-pstn {
- //
- // If you are freely delivering calls to the PSTN, list them here
- //
- //_1256428XXXX => Dial(DAHDI/G2/${EXTEN:7}); // Expose all of 256-428
- //_1256325XXXX => Dial(DAHDI/G2/${EXTEN:7}); // Ditto for 256-325
+//
+// If you are freely delivering calls to the PSTN, list them here
+//
+//_1256428XXXX => Dial(DAHDI/G2/${EXTEN:7}); // Expose all of 256-428
+//_1256325XXXX => Dial(DAHDI/G2/${EXTEN:7}); // Ditto for 256-325
};
context ael-dundi-e164-local {
- //
- // Context to put your dundi IAX2 or SIP user in for
- // full access
- //
- includes {
- ael-dundi-e164-canonical;
- ael-dundi-e164-customers;
- ael-dundi-e164-via-pstn;
- };
+//
+// Context to put your dundi IAX2 or SIP user in for
+// full access
+//
+includes {
+ael-dundi-e164-canonical;
+ael-dundi-e164-customers;
+ael-dundi-e164-via-pstn;
+};
};
context ael-dundi-e164-switch {
- //
- // Just a wrapper for the switch
- //
-
- switches {
- DUNDi/e164;
- };
+//
+// Just a wrapper for the switch
+//
+
+switches {
+DUNDi/e164;
+};
};
context ael-dundi-e164-lookup {
- //
- // Locally to lookup, try looking for a local E.164 solution
- // then try DUNDi if we don't have one.
- //
- includes {
- ael-dundi-e164-local;
- ael-dundi-e164-switch;
- };
- //
+//
+// Locally to lookup, try looking for a local E.164 solution
+// then try DUNDi if we don't have one.
+//
+includes {
+ael-dundi-e164-local;
+ael-dundi-e164-switch;
+};
+//
};
//
@@ -175,8 +175,8 @@
//
// ARG1 is the extension to Dial
//
- goto ${exten}|1;
- return;
+goto ${exten}|1;
+return;
};
//
@@ -186,7 +186,7 @@
// up, please go to www.gnophone.com or www.iaxtel.com
//
context ael-iaxtel700 {
- _91700XXXXXXX => Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel);
+_91700XXXXXXX => Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel);
};
//
@@ -196,91 +196,91 @@
// to be on-line or else dialing can be severly delayed.
//
context ael-iaxprovider {
- switches {
- // IAX2/user:[key]@myserver/mycontext;
- };
+switches {
+// IAX2/user:[key]@myserver/mycontext;
+};
};
context ael-trunkint {
- //
- // International long distance through trunk
- //
- includes {
- ael-dundi-e164-lookup;
- };
- _9011. => {
- &ael-dundi-e164(${EXTEN:4});
- Dial(${TRUNK}/${EXTEN:${TRUNKMSD}});
- };
+//
+// International long distance through trunk
+//
+includes {
+ael-dundi-e164-lookup;
+};
+_9011. => {
+&ael-dundi-e164(${EXTEN:4});
+Dial(${TRUNK}/${EXTEN:${TRUNKMSD}});
+};
};
@@ -383,9 +383,9 @@
// By default we include the demo. In a production system, you
// probably don't want to have the demo there.
- includes {
- ael-demo;
- };
+includes {
+ael-demo;
+};
//
// Extensions like the two below can be used for FWD, Nikotel, sipgate etc.
// Note that you must have a [sipprovider] section in sip.conf whereas
exten => stdexten-BUSY,1,Voicemail(${mbx},b)
- ; If busy, send to voicemail w/ busy announce
+; If busy, send to voicemail w/ busy announce
exten => stdexten-BUSY,n,NoOp(Finish stdexten BUSY)
exten => stdexten-BUSY,n,Return() ; If they press #, return to start
@@ -459,7 +459,7 @@
exten => _X.,n,Set(LOCAL(mbx)="${ext}"$["${cntx}" ? "@${cntx}" :: ""])
exten => _X.,n,Dial(${dev},20,p) ; Ring the interface, 20 seconds maximum, call screening
- ; option (or use P for databased call _X.creening)
+; option (or use P for databased call _X.creening)
exten => _X.,n,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
exten => stdexten-NOANSWER,1,Voicemail(${mbx},u) ; If unavailable, send to voicemail w/ unavail announce
@@ -521,7 +521,7 @@
; voicemail, etc.
;
exten => 1234,1,Playback(transfer,skip) ; "Please hold while..."
- ; (but skip if channel is not up)
+; (but skip if channel is not up)
exten => 1234,n,Gosub(stdexten(1234,${GLOBAL(CONSOLE)}))
exten => 1234,n,Goto(default,s,1) ; exited Voicemail
@@ -640,11 +640,11 @@
;exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK}
;exten => 6275,1,Gosub(stdexten(6275,${MARK}))
- ; assuming ${MARK} is something like DAHDI/2
+; assuming ${MARK} is something like DAHDI/2
;exten => 6275,n,Goto(default,s,1) ; exited Voicemail
;exten => mark,1,Goto(6275,1) ; alias mark to 6275
;exten => 6536,1,Gosub(stdexten(6236,${WIL}))
- ; Ditto for wil
+; Ditto for wil
;exten => 6536,n,Goto(default,s,1) ; exited Voicemail
;exten => wil,1,Goto(6236,1)
- ["2"] = function()
- app.background("demo-moreinfo")
- demo_instruct()
- end;
- ["3"] = function ()
- channel.LANGUAGE():set("fr") -- set the language to french
- demo_congrats()
- end;
+["2"] = function()
+app.background("demo-moreinfo")
+demo_instruct()
+end;
+["3"] = function ()
+channel.LANGUAGE():set("fr") -- set the language to french
+demo_congrats()
+end;
- ["1234"] = function()
- app.playback("transfer", "skip")
- -- do a dial here
- end;
+["1234"] = function()
+app.playback("transfer", "skip")
+-- do a dial here
+end;
Modified: trunk/configs/features.conf.sample
URL: http://svn.asterisk.org/svn-view/asterisk/trunk/configs/features.conf.sample?view=diff&rev=197528&r1=197527&r2=197528
==============================================================================
--- trunk/configs/features.conf.sample (original)
+++ trunk/configs/features.conf.sample Thu May 28 09:32:03 2009
@@ -5,52 +5,52 @@
[general]
parkext => 700 ; What extension to dial to park (all parking lots)
parkpos => 701-720 ; What extensions to park calls on. (defafult parking lot)
- ; These needs to be numeric, as Asterisk starts from the start position
- ; and increments with one for the next parked call.
+; These needs to be numeric, as Asterisk starts from the start position
+; and increments with one for the next parked call.
context => parkedcalls ; Which context parked calls are in (default parking lot)
;parkinghints = no ; Add hints priorities automatically for parking slots (default is no).
;parkingtime => 45 ; Number of seconds a call can be parked for
- ; (default is 45 seconds)
+; (default is 45 seconds)
;comebacktoorigin = yes ; Whether to return to the original calling extension upon parking
- ; timeout or to send the call to context 'parkedcallstimeout' at
- ; extension 's', priority '1' (default is yes).
+; timeout or to send the call to context 'parkedcallstimeout' at
+; extension 's', priority '1' (default is yes).
;courtesytone = beep ; Sound file to play to the parked caller
- ; when someone dials a parked call
- ; or the Touch Monitor is activated/deactivated.
+; when someone dials a parked call
+; or the Touch Monitor is activated/deactivated.
;parkedplay = caller ; Who to play the courtesy tone to when picking up a parked call
- ; one of: parked, caller, both (default is caller)
+; one of: parked, caller, both (default is caller)
;parkedcalltransfers = caller ; Enables or disables DTMF based transfers when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
+; one of: callee, caller, both, no (default is no)
;parkedcallreparking = caller ; Enables or disables DTMF based parking when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
+; one of: callee, caller, both, no (default is no)
;parkedcallhangup = caller ; Enables or disables DTMF based hangups when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
+; one of: callee, caller, both, no (default is no)
;parkedcallrecording = caller ; Enables or disables DTMF based one-touch recording when picking up a parked call.
- ; one of: callee, caller, both, no (default is no)
+; one of: callee, caller, both, no (default is no)
;adsipark = yes ; if you want ADSI parking announcements
;findslot => next ; Continue to the 'next' free parking space.
- ; Defaults to 'first' available
+; Defaults to 'first' available
;parkedmusicclass=default ; This is the MOH class to use for the parked channel
- ; as long as the class is not set on the channel directly
- ; using Set(CHANNEL(musicclass)=whatever) in the dialplan
+; as long as the class is not set on the channel directly
[... 2573 lines stripped ...]
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum