Posted: Fri Jun 24, 2005 2:07 am Post subject: [Asterisk-Users] BRIstuff/QuadBRI problem: Ring requested on
Hi all,
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode.
Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34)
which are only operating in dial out analog mode to deliver fax messages.
After a while of running fine (50-200 dial out connections)
on some S0 spans the following message occurs over and over again:
chan_zap.c:8009 pri_dchannel: Ring requested on unconfigured channel
255/255 span 5
The Modems connected to this span get NO DIALTONE for every ATD.
Modems on other spans continue to operate.
This error seems to appear mostly on span 5 and 6.
After restarting asterisk everything is okay again for a while.
Any hints about what is going on here are greatly appreciated ;-)
TIA, Bruno - bruno @ ic3s.de
------------
Connected to Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g currently running on pbx
(pid = 20305)
Verbosity is at least 5
pbx*CLI> show channels
Channel (Context Extension Pri ) State Appl. Data
Zap/25-1 (pri1 s 1 ) Up Bridged Call
Zap/128-1
Zap/128-1 (from-s0-faxmodems 00711xxx 5 ) Up Dial
Zap/r1/0711xxx
Zap/24-1 (pri1 s 1 ) Up Bridged Call
Zap/132-1
Zap/132-1 (from-s0-faxmodems 00242xxx 5 ) Up Dial
Zap/r1/0242xxx
4 active channel(s)
Jun 24 11:49:19 WARNING[20305]: chan_zap.c:8009 pri_dchannel: Ring
requested on unconfigured channel 255/255 span 5
== Primary D-Channel on span 6 down for TEI 64
== Primary D-Channel on span 6 up for TEI 64
-- Accepting overlap voice call from '' to '00394xxxx' on channel 0/2,
span 6
-- Starting simple switch on 'Zap/129-1'
-- Channel 0/2, span 7 got hangup
-- Hungup 'Zap/24-1'
== Spawn extension (from-s0-faxmodems, 00242xxx, 5) exited non-zero on
'Zap/132-1'
-- Hungup 'Zap/132-1'
-- Executing SetCallerPres("Zap/129-1", "prohib") in new stack
-- Executing NoOp("Zap/129-1", "") in new stack
-- Executing SetTransferCapability("Zap/129-1", "3K1AUDIO") in new
stack
-- Setting transfer capability to: 0x10 - 3K1AUDIO.
-- Executing SetCIDNum("Zap/129-1", "0410612345") in new stack
-- Executing Dial("Zap/129-1", "Zap/r1/039xxxx") in new stack
-- Requested transfer capability: 0x10 - 3K1AUDIO
-- Called r1/039xxxx
-- Zap/26-1 is ringing
-- Zap/26-1 answered Zap/129-1
-- Attempting native bridge of Zap/129-1 and Zap/26-1
Jun 24 11:49:35 WARNING[20305]: chan_zap.c:8009 pri_dchannel: Ring
requested on unconfigured channel 255/255 span 5
== Primary D-Channel on span 7 down for TEI 65
== Primary D-Channel on span 7 up for TEI 65
Posted: Fri Jun 24, 2005 2:21 am Post subject: [Asterisk-Users] BRIstuff/QuadBRI problem: Ring requested on
Hi,
can you please post the output of "zap show channel" for all channels
of an affected span? It seems that asterisk thinks that all B channels
are still in use. So i suspect some problem with call clearing.
I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM
equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode.
Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34)
which are only operating in dial out analog mode to deliver fax messages.
After a while of running fine (50-200 dial out connections)
on some S0 spans the following message occurs over and over again:
chan_zap.c:8009 pri_dchannel: Ring requested on unconfigured channel
255/255 span 5
The Modems connected to this span get NO DIALTONE for every ATD.
Modems on other spans continue to operate.
This error seems to appear mostly on span 5 and 6.
After restarting asterisk everything is okay again for a while.
Any hints about what is going on here are greatly appreciated ;-)
TIA, Bruno - bruno @ ic3s.de
------------
Connected to Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g currently running on pbx
(pid = 20305)
Verbosity is at least 5
pbx*CLI> show channels
Channel (Context Extension Pri ) State Appl. Data
Zap/25-1 (pri1 s 1 ) Up Bridged Call
Zap/128-1
Zap/128-1 (from-s0-faxmodems 00711xxx 5 ) Up Dial
Zap/r1/0711xxx
Zap/24-1 (pri1 s 1 ) Up Bridged Call
Zap/132-1
Zap/132-1 (from-s0-faxmodems 00242xxx 5 ) Up Dial
Zap/r1/0242xxx
4 active channel(s)
Jun 24 11:49:19 WARNING[20305]: chan_zap.c:8009 pri_dchannel: Ring
requested on unconfigured channel 255/255 span 5
== Primary D-Channel on span 6 down for TEI 64
== Primary D-Channel on span 6 up for TEI 64
-- Accepting overlap voice call from '' to '00394xxxx' on channel 0/2,
span 6
-- Starting simple switch on 'Zap/129-1'
-- Channel 0/2, span 7 got hangup
-- Hungup 'Zap/24-1'
== Spawn extension (from-s0-faxmodems, 00242xxx, 5) exited non-zero on
'Zap/132-1'
-- Hungup 'Zap/132-1'
-- Executing SetCallerPres("Zap/129-1", "prohib") in new stack
-- Executing NoOp("Zap/129-1", "") in new stack
-- Executing SetTransferCapability("Zap/129-1", "3K1AUDIO") in new
stack
-- Setting transfer capability to: 0x10 - 3K1AUDIO.
-- Executing SetCIDNum("Zap/129-1", "0410612345") in new stack
-- Executing Dial("Zap/129-1", "Zap/r1/039xxxx") in new stack
-- Requested transfer capability: 0x10 - 3K1AUDIO
-- Called r1/039xxxx
-- Zap/26-1 is ringing
-- Zap/26-1 answered Zap/129-1
-- Attempting native bridge of Zap/129-1 and Zap/26-1
Jun 24 11:49:35 WARNING[20305]: chan_zap.c:8009 pri_dchannel: Ring
requested on unconfigured channel 255/255 span 5
== Primary D-Channel on span 7 down for TEI 65
== Primary D-Channel on span 7 up for TEI 65
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum