Posted: Wed Jul 20, 2005 3:20 am Post subject: [Asterisk-Users] Problem while configuring two TDM400P cards
Hi to all,
I have been using Wildcard TDM400P with four fxs modules and it was
working fine now I have added another Wildcard TDM400P with four fxs
modules . So there are total 8 ports for 8 hard phones.
I have modified following configurations
In /etc/zaptel.conf
loadzone=us
defaultzone=us
fxoks=1-8
Posted: Wed Jul 20, 2005 3:36 am Post subject: [Asterisk-Users] Problem while configuring two TDM400P cards
On Wed, Jul 20, 2005 at 04:22:01AM -0700, Mazhar Hussain wrote:
Quote:
Hi to all,
I have been using Wildcard TDM400P with four fxs modules and it was
working fine now I have added another Wildcard TDM400P with four fxs
modules . So there are total 8 ports for 8 hard phones.
I have modified following configurations
In /etc/zaptel.conf
loadzone=us
defaultzone=us
fxoks=1-8
Posted: Wed Jul 20, 2005 4:23 am Post subject: [Asterisk-Users] Problem while configuring two TDM400P cards
What revision of card is the new one? It sounds like you have one of the
new Rev I cards and you aren't running either 1.0.9 or CVS HEAD. Either of
these will solve your problem if I am correct.
I have been using Wildcard TDM400P with four fxs modules and it was working
fine now I have added another Wildcard TDM400P with four fxs modules . So
there are total 8 ports for 8 hard phones.
I have modified following configurations
In /etc/zaptel.conf
loadzone=us
defaultzone=us
fxoks=1-8
/sbin/modprobe wcfxs
works fine ans show eight modules mapped.
But when I run
/sbin/ztcfg -vvv
I get following error
ZT_CHANCONFIG failed on channel 5
Is there error in configuration I also have checked Diguim card separately
it works
This I found in /var/log/asterisk/messages
Jul 20 11:57:04 WARNING[1144]: Unable to specify channel 5: Device or
resource busy Jul 20 11:57:04 ERROR[1144]: Unable to open channel 5: Device
or resource busy here = 0, tmp->channel = 5, channel = 5 Jul 20 11:57:04
ERROR[1144]: Unable to register channel '1-8' Jul 20 11:57:04 WARNING[1144]:
chan_zap.so: load_module failed, returning -1 Jul 20 11:57:04 WARNING[1144]:
Loading module chan_zap.so failed!
I will be very tanksfull to for this help. As I always get my query solved
from here.
Regards,
Mazhar
Nettechltd.com
The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or disclose
it to anyone else. If you received it in error please notify us immediately
and then destroy it.
On 7/20/05, Watkins, Bradley <Bradley.Watkins@compuware.com> wrote:
Quote:
What revision of card is the new one? It sounds like you have one of the
new Rev I cards and you aren't running either 1.0.9 or CVS HEAD. Either of
these will solve your problem if I am correct.
I have been using Wildcard TDM400P with four fxs modules and it was working
fine now I have added another Wildcard TDM400P with four fxs modules . So
there are total 8 ports for 8 hard phones.
I have modified following configurations
In /etc/zaptel.conf
loadzone=us
defaultzone=us
fxoks=1-8
/sbin/modprobe wcfxs
works fine ans show eight modules mapped.
But when I run
/sbin/ztcfg -vvv
I get following error
ZT_CHANCONFIG failed on channel 5
Is there error in configuration I also have checked Diguim card separately
it works
This I found in /var/log/asterisk/messages
Jul 20 11:57:04 WARNING[1144]: Unable to specify channel 5: Device or
resource busy Jul 20 11:57:04 ERROR[1144]: Unable to open channel 5: Device
or resource busy here = 0, tmp->channel = 5, channel = 5 Jul 20 11:57:04
ERROR[1144]: Unable to register channel '1-8' Jul 20 11:57:04 WARNING[1144]:
chan_zap.so: load_module failed, returning -1 Jul 20 11:57:04 WARNING[1144]:
Loading module chan_zap.so failed!
I will be very tanksfull to for this help. As I always get my query solved
from here.
Regards,
Mazhar
Nettechltd.com
The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or disclose
it to anyone else. If you received it in error please notify us immediately
and then destroy it.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum