Posted: Tue Dec 26, 2006 6:31 pm Post subject: [asterisk-speech-rec] Re: Beta4 causing speech rec performan
I went back and tried beta3 and I have the problem there, as well.
Sorry to point the finger at beta4. It seemed to be more pronounced
and I've gotten more complaints since I switched.
I've got vad_burst_threshold at 200 ms, vad_noise_floor at 12000,
barge-in at 100, eos delay at 1000ms and end_of_speech_timeout at 8000
ms and I'm still having the problem. If I set vad_noise_floor any
higher, I can't detect speech of a comfortable volume.
The tone blips range between 6 ms and 20 ms in length and, as far as I
know, are the result of partially clamped dtmf tones (which I get from
every SIP gateway provider I've tried). I get them with every cell
phone and landline phone I've tried.
Ideally, I'd love to get rid of the tone blips entirely as they're
also a problem during conferences. If you know how to do this, please
contact me off-list. If this isn't possible then perhaps a
modification could be made so that once out-of-band dtmf is detected.
the speech app only listens for more out-of-band dtmf (no speech)
until a timeout or stop digit is reached?
I can provide wav files of the blips if that's helpful.
I'd appreciate any suggestions.
Thanks
Tom
On 12/25/06, Tom [toms400] <toms400@gmail.com> wrote:
Quote:
A couple of days ago I installed 1.4 Beta4 and I noticed some changes
in results SpeechBackground returns. When users enter DTMF instead of
speech, the engine seems more sensitive and instead of waiting for a
concluding #, is exiting and returning a result too early. I've
checked the speech files and there is no background noise -- just some
short tone blips. I was not having this problem with Beta3.
Any ideas?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum