• News
  • Idefisk
  • Tools
  • Tutorials
  • Forum
  • Reviews
  • VoIP Providers
  • Archives
  • Gallery
ZOIPER softphone

The forum for asterisk and voip discussions
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Help me with digium TDM410P 4FXO ports

 
Post new topic   Reply to topic     Forum Index -> Hardware questions
View previous topic :: View next topic  
Author Message
digilog



Joined: 29 May 2010
Posts: 1
PostPosted: Sat May 29, 2010 9:48 pm    Post subject: Help me with digium TDM410P 4FXO ports Reply with quote
Hi ,
First of all i'm happy to be in this forum and i have problem with digium TDM410P with 4 FXO ports my problem is i installed it in motherborde slot and put in the power cable and run the pc and i have Centos 5.5
and when installed dahdi and Asterisk and asterisk GUI but problem i cant connect the ports
and here the comment i make and result of them :
dmesg :
Code:

dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
wctdm24xxp 0000:01:00.0: Port 1: Not installed
wctdm24xxp 0000:01:00.0: Port 2: Not installed
wctdm24xxp 0000:01:00.0: Port 3: Not installed
wctdm24xxp 0000:01:00.0: Port 4: Not installed
wctdm24xxp 0000:01:00.0: VPM100: Not Present
wctdm24xxp 0000:01:00.0: Found a Wildcard TDM: Wildcard TDM410P (0 digital modules, 0 analog modules)
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
virbr0: no IPv6 routers present
device vif0.0 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
ADDRCONF(NETDEV_UP): peth0: link is not ready
e1000e: peth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
peth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
device peth0 entered promiscuous mode
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
wctdm24xxp 0000:01:00.0: Missed interrupt. Increasing latency to 5 ms in order to compensate.
eth0: no IPv6 routers present
wctdm24xxp 0000:01:00.0: Missed interrupt. Increasing latency to 11 ms in order to compensate.
wctdm24xxp 0000:01:00.0: Missed interrupt. Increasing latency to 16 ms in order to compensate.
wctdm24xxp 0000:01:00.0: Host failed to service card interrupt within 128 ms which is a hardunderun.
wctdm24xxp 0000:01:00.0: Host failed to service card interrupt within 128 ms which is a hardunderun.
usbcore: deregistering driver xpp_usb
dahdi_transcode: Unloaded.
ACPI: PCI interrupt for device 0000:01:00.0 disabled
wctdm24xxp 0000:01:00.0: Freed a Wildcard
PCI: Enabling device 0000:01:00.0 (0010 -> 0013)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
wctdm24xxp 0000:01:00.0: Port 1: Not installed
wctdm24xxp 0000:01:00.0: Port 2: Not installed
wctdm24xxp 0000:01:00.0: Port 3: Not installed
wctdm24xxp 0000:01:00.0: Port 4: Not installed
wctdm24xxp 0000:01:00.0: VPM100: Not Present
wctdm24xxp 0000:01:00.0: Found a Wildcard TDM: Wildcard TDM410P (0 digital modules, 0 analog modules)
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
wctdm24xxp 0000:01:00.0: Missed interrupt. Increasing latency to 5 ms in order to compensate.
wctdm24xxp 0000:01:00.0: Host failed to service card interrupt within 128 ms which is a hardunderun.
wctdm24xxp 0000:01:00.0: Host failed to service card interrupt within 128 ms which is a hardunderun.
usbcore: deregistering driver xpp_usb
dahdi_transcode: Unloaded.
ACPI: PCI interrupt for device 0000:01:00.0 disabled
wctdm24xxp 0000:01:00.0: Freed a Wildcard
PCI: Enabling device 0000:01:00.0 (0010 -> 0013)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 17
wctdm24xxp 0000:01:00.0: Port 1: Not installed
wctdm24xxp 0000:01:00.0: Port 2: Not installed
wctdm24xxp 0000:01:00.0: Port 3: Not installed
wctdm24xxp 0000:01:00.0: Port 4: Not installed
wctdm24xxp 0000:01:00.0: VPM100: Not Present
wctdm24xxp 0000:01:00.0: Found a Wildcard TDM: Wildcard TDM410P (0 digital modules, 0 analog modules)
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
dahdi: Registered tone zone 0 (United States / North America)



dahdi_cfg -vv:
Code:

DAHDI Tools Version - 2.3.0

DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================


Channel map:


0 channels to configure.


dahdi_scan:
Code:

[1]
active=yes
alarms=UNCONFIGURED
description=Wildcard TDM410P Board 1
name=WCTDM/0
manufacturer=Digium
devicetype=Wildcard TDM410P (VPM100M)
location=PCI Bus 01 Slot 01
basechan=1
totchans=4
irq=17
type=analog
port=1,none
port=2,none
port=3,none
port=4,none


lsdahdi :
Code:

### Span  1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
  1 EMPTY
  2 EMPTY
  3 EMPTY
  4 EMPTY


dahdi_hardware:
Code:

pci:0000:01:00.0     wctdm24xxp+  d161:8005 Wildcard TDM410P


lspci -v :
Code:

01:00.0 Ethernet controller: Digium, Inc. TDM400P (rev 11)
        Subsystem: Digium, Inc. TDM400P
        Flags: bus master, medium devsel, latency 64, IRQ 17
        I/O ports at d800 [size=256]
        Memory at f9dfec00 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [c0] Power Management version 2


hope to find answer Smile
Thank you .
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Hardware questions All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
contact us at: support@asteriskguru.com - asterisKGuru.com © all rights reserved   |   *asterisk is registered trademark of © Digium™