[conrad]

Hi !

I've successfully configured and installed Asterisk in my system . However , I cant hear a dialtone in my analog phone connected to FXS port . The outside line is connected to FXO port , is this has something to do with the wiring of RJ11 or my TDM board is damage ? The led is turn on/off when loading zaptel modules . I post the diagnostic step done to figure things out . Thanks in Advance!

ztcfg -vvv
________________
Zaptel Version: SVN-branch-1.4-r3012
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels configured.

____________________

[root@localhost ~]# cat /proc/interrupts
CPU0 CPU1
0: 8936256 8928817 IO-APIC-edge timer
1: 4870 4806 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-level acpi
12: 32547 27567 IO-APIC-edge i8042
14: 318703 318256 IO-APIC-edge ide0
50: 209629 0 IO-APIC-level eth0
58: 35699593 35717687 IO-APIC-level wctdm
66: 16068 15879 IO-APIC-level HDA Intel
177: 0 0 IO-APIC-level uhci_hcd:usb3
185: 35741 27496 IO-APIC-level uhci_hcd:usb2, libata
225: 83129 87484 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
233: 2144895 2141164 IO-APIC-level uhci_hcd:usb4, i915@pci:0000:00:02.0
NMI: 0 0
LOC: 17864560 17864558
ERR: 0
MIS: 0

____________________________________

lspci -vb

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: medium devsel, IRQ 11
I/O ports at 2000

04:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device b119:0003
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at 1000
Memory at 50001000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2

04:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN Controller (rev 01)
Subsystem: Intel Corporation DeskTop Board D945GTP
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at 50000000 (32-bit, non-prefetchable)
I/O ports at 1100
Capabilities: [dc] Power Management version 2
____________________________________________________

[root@localhost ~]# lsmod |grep zaptel
zaptel 189092 1 wctdm
crc_ccitt 6337 1 zaptel
_________________
Everything should be as simple as possible but not simpler , Im just a simple man.