Posted: Tue Jan 11, 2005 11:54 am Post subject: [Asterisk-bsd] Asterisk, NetBSD and the state of the world
Hello folks. I have a build of Asterisk from December 2003 wich I've
been running under NetBSD 1.6.x and 2.0 quite successfully. This build,
however, doesn't work with any of the Digium hardware, and doesn't support
conferencing, due to the lack of a timing source. I'm aware that new
versions of Asterisk can be compiled to run under NetBSD, but what new
features do I get by upgrading? Can I now run the IAX2 protocol? Will
conferencing work under NetBSD with Asterisk-1.x? Is there any hardware
support? What about H.323, skinny, etc?
In other words, can people relate their experience with NetBSD and
Asterisk?
-thanks
-Brian
Posted: Tue Jan 11, 2005 12:17 pm Post subject: [Asterisk-bsd] Asterisk, NetBSD and the state of the world
Brian Buhrow wrote:
Quote:
Hello folks. I have a build of Asterisk from December 2003 wich I've
been running under NetBSD 1.6.x and 2.0 quite successfully. This build,
however, doesn't work with any of the Digium hardware, and doesn't support
conferencing, due to the lack of a timing source. I'm aware that new
versions of Asterisk can be compiled to run under NetBSD, but what new
features do I get by upgrading? Can I now run the IAX2 protocol? Will
conferencing work under NetBSD with Asterisk-1.x? Is there any hardware
support? What about H.323, skinny, etc?
In other words, can people relate their experience with NetBSD and
Asterisk?
-thanks
-Brian
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd
I am (very slowly) working on hardware support under NetBSD for the
Digium TDM400P cards... I have something compiling but not yet working.
(See previous posts on this list). The one thing that _is_ working
(FSVO "working") is the ztdummy driver.
I have been able to use IAX2 successfully under NetBSD and asterisk 1.0+
(mostly I use cvs snapshots). I have not yet tried to use conferencing.
Asterisk compiles pretty much out of the box under NetBSD 2.0 and
later. I'm currently working (slowly) on creating a pkgsrc package for
it, and on the aforementioned drivers. Unfortunately the holidays and
real work have gotten in the way for the moment, but I hope to be able
to dedicate some more time to it in a week or three, and possibly to
finally figure out the source of my driver problems. Feel free to
contact me off-list for more information and questions.
Posted: Tue Jan 11, 2005 12:44 pm Post subject: [Asterisk-bsd] Asterisk, NetBSD and the state of the world
I agree w/ Jeff, it works pretty much out of the box. I currently have
two NetBSD 2.0 boxes linked via IAX2, one of the boxes registered with
several SIP-based peers remotely, one only doing local SIP to a hardphone.
This works in a stable way, though for time to time I've had to reload SIP,
probably due to issues with the service providers.
Just to point this out, though I don't know how important this is to
many of you... I'm still trying to determine the cause of a voicemail/
digits playback on NetBSD 2.0 with the cvs.
Any digit over 9 causes it to hang up the call.
-j
On Tue, Jan 11, 2005 at 12:16:24PM -0800, Jeff Rizzo wrote:
Quote:
Brian Buhrow wrote:
> Hello folks. I have a build of Asterisk from December 2003 wich I've
>been running under NetBSD 1.6.x and 2.0 quite successfully. This build,
>however, doesn't work with any of the Digium hardware, and doesn't support
>conferencing, due to the lack of a timing source. I'm aware that new
>versions of Asterisk can be compiled to run under NetBSD, but what new
>features do I get by upgrading? Can I now run the IAX2 protocol? Will
>conferencing work under NetBSD with Asterisk-1.x? Is there any hardware
>support? What about H.323, skinny, etc?
> In other words, can people relate their experience with NetBSD and
>Asterisk?
>-thanks
>-Brian
>_______________________________________________
>Asterisk-BSD mailing list
>Asterisk-BSD@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
>
I am (very slowly) working on hardware support under NetBSD for the
Digium TDM400P cards... I have something compiling but not yet working.
(See previous posts on this list). The one thing that _is_ working
(FSVO "working") is the ztdummy driver.
I have been able to use IAX2 successfully under NetBSD and asterisk 1.0+
(mostly I use cvs snapshots). I have not yet tried to use conferencing.
Asterisk compiles pretty much out of the box under NetBSD 2.0 and
later. I'm currently working (slowly) on creating a pkgsrc package for
it, and on the aforementioned drivers. Unfortunately the holidays and
real work have gotten in the way for the moment, but I hope to be able
to dedicate some more time to it in a week or three, and possibly to
finally figure out the source of my driver problems. Feel free to
contact me off-list for more information and questions.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum