Asterisk Guru

AsteriskGuru Archives
Mailing List Archives

FAQ

Memberlist

Usergroups

Profile

[asterisk-users] Asterisk and Data Modem

AsteriskGuru Archives Forum Index -> Asterisk-Users

View previous topic :: View next topic

Author

Message

jmorgan at c-a-solutions.
Guest

Posted: Tue May 26, 2009 9:11 am Post subject: [asterisk-users] Asterisk and Data Modem

Hi All, We have an Asterisk 1.4.21.2 box which uses a 2 port Digium card to bridge calls, as follows: ISDN Provider <---> Span 1(pri_cpe) <---> Span 2(pri_net) <----> Phone System The company that looks after our internal phone system can no longer dial in using their data modem in order to maintain the internal phone system. Is there any way we can configure our asterisk to allow them to dial in using their modem? Regards, Jon. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

abalashov at evaristesys.
Guest

Posted: Tue May 26, 2009 9:47 am Post subject: [asterisk-users] Asterisk and Data Modem

Sure - you just need to figure out what number is being dialed, make
sure that number rings on the incoming PRI, and make sure the phone
system expects that call to come in the standard PRI trunk group and
not some dedicated analog craft port.

--
Sent from mobile device

On May 26, 2009, at 6:05 AM, "Jon Morgan" <jmorgan@c-a-
solutions.co.uk> wrote:

Quote:

Hi All,

We have an Asterisk 1.4.21.2 box which uses a 2 port Digium card to
bridge
calls, as follows:

ISDN Provider <---> Span 1(pri_cpe) <---> Span 2(pri_net) <----> Phone
System

The company that looks after our internal phone system can no longer
dial in
using their data modem in order to maintain the internal phone
system. Is
there any way we can configure our asterisk to allow them to dial in
using
their modem?

Regards,

Jon.

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

danny at debsinc.com
Guest

Posted: Tue May 26, 2009 12:43 pm Post subject: [asterisk-users] Asterisk and Data Modem

Install nv_faxdetect. This will make asterisk not attempt to process the modem call for a specified period of time. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jon Morgan Sent: Tuesday, May 26, 2009 5:06 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] Asterisk and Data Modem Hi All, We have an Asterisk 1.4.21.2 box which uses a 2 port Digium card to bridge calls, as follows: ISDN Provider <---> Span 1(pri_cpe) <---> Span 2(pri_net) <----> Phone System The company that looks after our internal phone system can no longer dial in using their data modem in order to maintain the internal phone system. Is there any way we can configure our asterisk to allow them to dial in using their modem? Regards, Jon. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

robb at boardman.me.uk
Guest

Posted: Tue May 26, 2009 4:50 pm Post subject: [asterisk-users] Asterisk and Data Modem

Jon Morgan wrote:

Quote:

Hi All,

We have an Asterisk 1.4.21.2 box which uses a 2 port Digium card to bridge
calls, as follows:

ISDN Provider <---> Span 1(pri_cpe) <---> Span 2(pri_net) <----> Phone
System

The company that looks after our internal phone system can no longer dial in
using their data modem in order to maintain the internal phone system. Is
there any way we can configure our asterisk to allow them to dial in using
their modem?

Regards,

Jon.

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Hi jon

What system is it?

you need to set the transfer capability

eg
exten => _X.,1,gotoif($[${TRANSFERCAPABILITY}=DIGITAL]?8:)
exten => _X.,2,Noop
exten => _X.,3,ringing
exten => _X.,4,set(CDR(accountcode)=${EXTEN})
exten => _X.,5,Noop
exten => _X.,6,dial(ZAP/g2/${EXTEN},,r)
exten => _X.,7,hangup
exten => _X.,8,Set(CHANNEL(transfercapability)=DIGITAL)
exten => _X.,9,dial(ZAP/g2/${EXTEN})
exten => _X.,n,hangup

Regards
Robb

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

Display posts from previous:

AsteriskGuru Archives Forum Index -> Asterisk-Users	All times are GMT
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum