461X Phones ----> CME -----> my dial peer points to Asterisk IP for 600X Phones
so in the above setup I'm able to call from Asterisk to my CME and vice-versa.
here is my problem: when I call from 6004 to my cme extension 4615, on 4615 I've configured noans timeout to 15 and then it goes to my unity express (cue) for voicemail so when I call my cme extension it rings for few seconds and then on my asterisk cli I see "500 Internal Server Error" back from my CCM IP and getting standard asterisk message saying "all circuits are busy now" . as per my understanding it should go to my cue.
please advise and let me know if you need any other details.
Posted: Sat May 23, 2009 7:34 pm Post subject: [asterisk-users] Asterisk CCM, CME Integration
On Wed, May 20, 2009 at 12:44 AM, Arun Kumar <arunvoip@gmail.com> wrote:
Quote:
here is my problem: when I call from 6004 to my cme extension 4615, on 4615
I've configured noans timeout to 15 and then it goes to my unity express
(cue) for voicemail so when I call my cme extension it rings for few seconds
and then on my asterisk cli I see "500 Internal Server Error" back from my
CCM IP and getting standard asterisk message saying "all circuits are busy
now" . as per my understanding it should go to my cue.
You need to enable better debugging on the Cisco side. You shouldn't
be getting a 500 internal server error. You need to debug the Cisco
and find out what it says besides 500 internal server error. There
should be logging for an error like that.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Sun May 24, 2009 2:55 am Post subject: [asterisk-users] Asterisk CCM, CME Integration
HI All,
I got solved this issue.
Thanks all for your help
Arun
On Sun, May 24, 2009 at 1:58 AM, David Backeberg <dbackeberg@gmail.com (dbackeberg@gmail.com)> wrote:
Quote:
On Wed, May 20, 2009 at 12:44 AM, Arun Kumar <arunvoip@gmail.com (arunvoip@gmail.com)> wrote:
> here is my problem: when I call from 6004 to my cme extension 4615, on 4615
> I've configured noans timeout to 15 and then it goes to my unity express
> (cue) for voicemail so when I call my cme extension it rings for few seconds
> and then on my asterisk cli I see "500 Internal Server Error" back from my
> CCM IP and getting standard asterisk message saying "all circuits are busy
> now" . as per my understanding it should go to my cue.
You need to enable better debugging on the Cisco side. You shouldn't
be getting a 500 internal server error. You need to debug the Cisco
and find out what it says besides 500 internal server error. There
should be logging for an error like that.
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum