Posted: Thu May 28, 2009 5:22 pm Post subject: [asterisk-users] probably an rtfm but... need to dial out to
Hello all,
I have a need to be able to use the originate AMI command to dial out to
the PSTN, have that person answer and then have the second PSTN
connection dialed out.
I have tried to use:
Action: Originate
Channel: sip/<number>@<provider>
Context: default
Exten: <othernumber>
Priority: 1
Timeout: 30000
This does not dial the number through the provider, actually, it seems
that the number never gets passed to the provider.
I suppose I could create a dummy sip exten but it would have to be one
that had no device attached and I am unclear on how to do that.
Any Sugestion on either method?
TIA
--
JohnM
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Thu May 28, 2009 5:31 pm Post subject: [asterisk-users] probably an rtfm but... need to dial out to
users.conf
[108]
username = 108
transfer = yes
mailbox = 108
call-limit = 100
fullname = General Messages
registersip = no
host = dynamic
callgroup = 1
context = DLPN_DialPlan1
cid_number = 108
hasvoicemail = yes
vmsecret = 1234
email = dummy@dummy.com
threewaycalling = no
hasdirectory = no
callwaiting = no
hasmanager = no
hasagent = no
hassip = yes
hasiax = no
secret =
nat = yes
canreinvite = no
dtmfmode = rfc2833
insecure = no
pickupgroup = 1
disallow = all
allow = ulaw,gsm
autoprov = no
label =
macaddress =
linenumber = 1
no entry in sip.conf
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of John Millican
Sent: Thursday, May 28, 2009 1:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] probably an rtfm but... need to dial out to 2
PSTNlines from AMI
Hello all,
I have a need to be able to use the originate AMI command to dial out to
the PSTN, have that person answer and then have the second PSTN
connection dialed out.
I have tried to use:
Action: Originate
Channel: sip/<number>@<provider>
Context: default
Exten: <othernumber>
Priority: 1
Timeout: 30000
This does not dial the number through the provider, actually, it seems
that the number never gets passed to the provider.
I suppose I could create a dummy sip exten but it would have to be one
that had no device attached and I am unclear on how to do that.
Any Sugestion on either method?
TIA
--
JohnM
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Thu May 28, 2009 5:53 pm Post subject: [asterisk-users] probably an rtfm but... need to dial out to
Danny Nicholas wrote:
Quote:
users.conf
[108]
username = 108
transfer = yes
mailbox = 108
call-limit = 100
fullname = General Messages
registersip = no
host = dynamic
callgroup = 1
context = DLPN_DialPlan1
cid_number = 108
hasvoicemail = yes
vmsecret = 1234
email = dummy@dummy.com
threewaycalling = no
hasdirectory = no
callwaiting = no
hasmanager = no
hasagent = no
hassip = yes
hasiax = no
secret =
nat = yes
canreinvite = no
dtmfmode = rfc2833
insecure = no
pickupgroup = 1
disallow = all
allow = ulaw,gsm
autoprov = no
label =
macaddress =
linenumber = 1
no entry in sip.conf
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of John Millican
Sent: Thursday, May 28, 2009 1:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] probably an rtfm but... need to dial out to 2
PSTNlines from AMI
Hello all,
I have a need to be able to use the originate AMI command to dial out to
the PSTN, have that person answer and then have the second PSTN
connection dialed out.
I have tried to use:
Action: Originate
Channel: sip/<number>@<provider>
Context: default
Exten: <othernumber>
Priority: 1
Timeout: 30000
This does not dial the number through the provider, actually, it seems
that the number never gets passed to the provider.
I suppose I could create a dummy sip exten but it would have to be one
that had no device attached and I am unclear on how to do that.
Any Sugestion on either method?
TIA
Thanks for the info Danny.
I also found while doing more reading that I can use
Action: Originate
Channel: local/1@myNewContext
Context: default
Exten: <othernumber>
Priority: 1
Timeout: 30000
and then setup a context in the dial plan that dial out to the needed
number.
I new as soon as I sent the question something rtfm ish would hit me
Thanks again
--
JohnM
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
