Asterisk Guru

AsteriskGuru Archives
Mailing List Archives

FAQ

Memberlist

Usergroups

Profile

[Asterisk-bsd] Unable to reset default ring

AsteriskGuru Archives Forum Index -> Asterisk-BSD

View previous topic :: View next topic

Author

Message

marc.smith at mcc.edu
Guest

Posted: Mon Jul 07, 2008 2:16 am Post subject: [Asterisk-bsd] Unable to reset default ring

Hi, I seem to be getting one of these messages in /var/log/asterisk/messages whenever I get an incoming call that goes from my FXO line to my FXS port (FXO -> FXS). Calls that originate from the inside (FXS -> FXO) don't generate any of these messages. [Jul 3 19:37:39] WARNING[37721] chan_zap.c: Unable to reset default ring on 'Zap/4-1' [Jul 4 08:54:27] WARNING[37721] chan_zap.c: Unable to reset default ring on 'Zap/4-1' [Jul 6 19:40:42] WARNING[37721] chan_zap.c: Unable to reset default ring on 'Zap/4-1' I've seen some other posts out there about a similar issue, but I don't think there was ever a solution. Everything seems to work fine; just wondering what these are all about. asterbox# cat /usr/local/etc/zaptel.conf # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A200 [slot:9 bus:7 span:1] <wanpipe1> fxsks=1 fxsks=2 fxoks=3 fxoks=4 asterbox# cat /usr/local/etc/asterisk/zapata.conf ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A200 [slot:9 bus:7 span:1] <wanpipe1> context=from-zaptel group=0 signalling = fxs_ks channel => 1 context=comcast-in group=0 signalling = fxs_ks channel => 2 context=from-internal group=1 signalling = fxo_ks channel => 3 context=comcast-calls threewaycalling=no mailbox=101 callerid="Home phone" <101> group=1 signalling = fxo_ks channel => 4 asterbox# uname -r 7.0-RELEASE-p2 zaptel-1.4.6_5 asterisk-1.4.20.1_1 wanpipe-3.2_3 Again, not having any problems, just curious what the message means and if there is a way to make it go away. =) Thanks, Marc _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- Asterisk-BSD mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-bsd

Display posts from previous:

AsteriskGuru Archives Forum Index -> Asterisk-BSD	All times are GMT
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum