AsteriskGuru Archives

bekelund at whisolutions. · Guest

Greetings all, I have an interesting problem I am trying to work around.

I currently have 2 * servers running in separate offices, using IAX2 to trunk between them, and queues in our main office. I’ll call them Office_A and Office_B. I use Polycom 501s with a primary and secondary server, the primary being whichever server is local to them. What I’m finding is that when a user logs into the queue on Office_A, if their primary server is set to Office_B, the IAX trunk ends up getting logged into the queue, which is no good. I tried using a SIP trunk to make the connection, but I either end up with a digest user mismatch or a Forbidden Auth. After playing around with insecure=port,invite and fromuser=<user> I was able to log into the queue being homed off Office_B, but the agent logged into the queue was the SIP trunk. Below is the relevant parts of sip.conf, any suggestions are welcome.

Office_A sip.conf

[general]
Register => office_a:secret@10.10.40.118/office_b

[office_b]
fromuser=office_a
username=office_a
type=peer
secret=secret
context=incoming
host=dynamic
insecure=port,invite

Office_B sip.conf

[general]
Register => office_b:secret@10.10.40.118/office_a

[office_a]
fromuser=office_b
username=office_b
type=peer
secret=secret
context=incoming
host=dynamic
insecure=port,invite

Thanks,

Bryan

STATEMENT OF CONFIDENTIALITY:

The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain confidential or privileged information. If you are not the intended
recipient, please notify WHI Solutions immediately at gc@whisolutions.com,
and destroy all copies of this message and any attachments.