OOH323 Debugging Enabled
-- Executing Answer("SIP/3513-090f7d40", "") in new stack
-- Executing Wait("SIP/3513-090f7d40", "1") in new stack
-- Executing DeadAGI("SIP/3513-090f7d40", " a2billing.php|1") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
a2billing.php|1: line:58 - IDCONFIG : 1
a2billing.php|1:
a2billing.php|1: line:67 - MODE : standard
a2billing.php|1:
-- AGI Script Executing Application: (Dial) Options: ( OOH323/12127773456@OOH323|60|HLxyz(5400000:31000:00000 ([email]OOH323/12127773456@OOH323%7C60%7CHLxyz(5400000:31000:00000[/email])))
--- ooh323_request - data 12127773456@OOH323 ([email]12127773456@OOH323[/email]) format 0x4 (ulaw)
--- find_peer
+++ find_peer
+++ ooh323_request
--- ooh323_call- 12127773456@OOH323 ([email]12127773456@OOH323[/email])
+++ ooh323_call
-- Called 12127773456@OOH323 ([email]12127773456@OOH323[/email])
Segmentation fault (core dumped)
[root@asterisk1 ~]#
show version
Asterisk 1.2.12.1 built by root @ localhost.localdomain on a i686 running Linux on 2006-10-18 18:35:57 UTC
; Objective System's H323 Configuration example for Asterisk
; ooh323c driver configuration
;
; [general] section defines global parameters
;
; This is followed by profiles which can be of three types - user/peer/friend
; Name of the user profile should match with the h323id of the user device.
; For peer/friend profiles, host ip address must be provided as "dynamic" is
; not supported as of now.
;
; Syntax for specifying a H323 device in extensions.conf is
; For Registered peers/friends profiles:
; OOH323/name where name is the name of the peer/friend profile.
;
; For unregistered H.323 phones:
; OOH323/ip[:port] OR if gk is used OOH323/alias where alias can be any H323
; alias
;
; For dialing into another asterisk peer at a specific exten
; OOH323/exten/peer OR OOH323/exten@ip ([email]OOH323/exten@ip[/email])
;
; Domain name resolution is not yet supported.
;
; When a H.323 user calls into asterisk, his H323ID is matched with the profile
; name and context is determined to route the call
;
; The channel driver will register all global aliases and aliases defined in
; peer profiles with the gatekeeper, if one exists. So, that when someone
; outside our pbx (non-user) calls an extension, gatekeeper will route that
; call to our asterisk box, from where it will be routed as per dial plan.
[general]
;Define the asetrisk server h323 endpoint
;The port asterisk should listen for incoming H323 connections.
;Default - 1720
port=1720
;The dotted IP address asterisk should listen on for incoming H323
;connections
;Default - tries to find out local ip address on it's own
bindaddr= 213.138.36.153
;This parameter indicates whether channel driver should register with
;gatekeeper as a gateway or an endpoint.
;Default - no
gateway=yes
;Whether asterisk should use fast-start and tunneling for H323 connections.
;Default - yes
faststart=no
;h245tunneling=yes
;H323-ID to be used for asterisk server
;Default - Asterisk PBX
h323id=ObjSysAsterisk
;e164=100
;CallerID to use for calls
;Default - Same as h323id
callerid=asterisk
;Whether this asterisk server will use gatekeeper.
;Default - DISABLE
;gatekeeper = DISCOVER
gatekeeper = 213.138.36.153
;gatekeeper = DISABLE
;Location for H323 log file
;Default - /var/log/asterisk/h323_log
logfile=/var/log/asterisk/h323_log
;Following values apply to all users/peers/friends defined below, unless
;overridden within their client definition
;Sets default context all clients will be placed in.
;Default - default
context=default
;Sets rtptimeout for all clients, unless overridden
;Default - 60 seconds
;rtptimeout=60 ; Terminate call if 60 seconds of no RTP activity
; when we're not on hold
;Type of Service
;Default - none (lowdelay, thoughput, reliability, mincost, none)
;tos=none
;amaflags = default
;The account code used by default for all clients.
;accountcode=h3230101
;The codecs to be used for all clients.Only ulaw and gsm supported as of now.
;Default - ulaw
; ONLY ulaw, gsm, g729 and g7231 supported as of now
allow=all ;Note order of disallow/allow is important.
;allow=g729
;allow=ulaw
; dtmf mode to be used by default for all clients. Supports rfc2833, q931keypad
; h245alphanumeric, h245signal.
;Default - rfc 2833
dtmfmode=rfc2833
; User/peer/friend definitions:
; User config options Peer config options
; ------------------ -------------------
; context
; disallow disallow
; allow allow
; accountcode accountcode
; amaflags amaflags
; dtmfmode dtmfmode
; rtptimeout ip
; port
; h323id
; email
; url
; e164
; rtptimeout
;
;Define users here
;Section header is extension
;[myuser1]
;type=user
;context=context1
;disallow=all
;allow=gsm
;allow=ulaw
[dol_h323]
type=peer
ip=83.66.50.2 ; UPDATE with appropriate ip address
port=1720 ; UPDATE with appropriate port
disallow=all
allow=g729
;[myfriend1]
;type=friend
;context=default
;ip=10.0.0.82 ; UPDATE with appropriate ip address
;port=1820 ; UPDATE with appropriate port
;disallow=all
;allow=ulaw
;e164=12345
;rtptimeout=60
;dtmfmode=rfc2833
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum