Posted: Tue May 19, 2009 1:53 pm Post subject: [asterisk-users] Unable to make outbound calls
I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
I've got a 2 port T2XXP card attached with on T1 currently plugged in.
Inbound calls work fine, but outbound fail with the rather cryptic:
[May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 0 - Unknown)
There are similar threads I've found on the net but they tend to be related
to dahdi not being loaded or similar. In my case dahdi is loaded and
channels visible.
I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
server that is currently working fine. But still no luck.
Any hints would be appreciated. In particular if someone can suggest some
documentation on what _could_ cause a (cause 0 - Unknown) then I can
investigate those.
I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
I've got a 2 port T2XXP card attached with on T1 currently plugged in.
Inbound calls work fine, but outbound fail with the rather cryptic:
[May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 0 - Unknown)
There are similar threads I've found on the net but they tend to be related
to dahdi not being loaded or similar. In my case dahdi is loaded and
channels visible.
I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
server that is currently working fine. But still no luck.
Any hints would be appreciated. In particular if someone can suggest some
documentation on what _could_ cause a (cause 0 - Unknown) then I can
investigate those.
Posted: Tue May 19, 2009 3:30 pm Post subject: [asterisk-users] Unable to make outbound calls
Quote:
Can you make an outbound call after your first incoming call? That's what I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.
Regardless, thank you for your suggestion.
On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
Quote:
> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>
> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>
> Inbound calls work fine, but outbound fail with the rather cryptic:
> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable to
> create channel of type 'DAHDI' (cause 0 - Unknown)
>
> There are similar threads I've found on the net but they tend to be related
to
Quote:
> dahdi not being loaded or similar. In my case dahdi is loaded and channels
> visible.
>
> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
> server that is currently working fine. But still no luck.
>
> Any hints would be appreciated. In particular if someone can suggest some
> documentation on what _could_ cause a (cause 0 - Unknown) then I can
> investigate those.
>
> Some details below:
> <removed in reply to keep email readable>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Can you make an outbound call after your first incoming call? That's what
I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.
Regardless, thank you for your suggestion.
On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
Quote:
> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>
> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>
> Inbound calls work fine, but outbound fail with the rather cryptic:
> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
to
Quote:
> create channel of type 'DAHDI' (cause 0 - Unknown)
>
> There are similar threads I've found on the net but they tend to be
related
to
Quote:
> dahdi not being loaded or similar. In my case dahdi is loaded and
channels
Quote:
> visible.
>
> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
> server that is currently working fine. But still no luck.
>
> Any hints would be appreciated. In particular if someone can suggest some
> documentation on what _could_ cause a (cause 0 - Unknown) then I can
> investigate those.
>
> Some details below:
> <removed in reply to keep email readable>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Wed May 20, 2009 7:00 am Post subject: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 RED 0 0 0
> Can you make an outbound call after your first incoming call? That's what
I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.
Regardless, thank you for your suggestion.
On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>
>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>
>> Inbound calls work fine, but outbound fail with the rather cryptic:
>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
to
>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>
>> There are similar threads I've found on the net but they tend to be
related
to
>> dahdi not being loaded or similar. In my case dahdi is loaded and
channels
>> visible.
>>
>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>> server that is currently working fine. But still no luck.
>>
>> Any hints would be appreciated. In particular if someone can suggest some
>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>> investigate those.
>>
>> Some details below:
>> <removed in reply to keep email readable>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Wed May 20, 2009 12:58 pm Post subject: [asterisk-users] Unable to make outbound calls
This all looks ok. What happens if you try to access the DAHDI channel
outside of Asterisk control:
In dialplan
Exten => 9,1,Dial(DAHDI/1)
Dial 9
Get dialtone
Dial number
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
Sent: Wednesday, May 20, 2009 2:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 RED 0 0 0
> Can you make an outbound call after your first incoming call? That's
what
Quote:
I
experienced with 1.4.24.
No I can't. I saw similar threads while searching for a solution, but in
my
Quote:
case outbound calls are never possible.
Regardless, thank you for your suggestion.
On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>
>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>
>> Inbound calls work fine, but outbound fail with the rather cryptic:
>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
to
>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>
>> There are similar threads I've found on the net but they tend to be
related
to
>> dahdi not being loaded or similar. In my case dahdi is loaded and
channels
>> visible.
>>
>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>> server that is currently working fine. But still no luck.
>>
>> Any hints would be appreciated. In particular if someone can suggest
some
Quote:
>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>> investigate those.
>>
>> Some details below:
>> <removed in reply to keep email readable>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Tue May 26, 2009 12:28 pm Post subject: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [9@DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 1
-- Channel 0/1, span 1 got hangup, cause 90
WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
dtmf
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
On 20/5/09 3:52 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
Quote:
This all looks ok. What happens if you try to access the DAHDI channel
outside of Asterisk control:
In dialplan
Exten => 9,1,Dial(DAHDI/1)
Dial 9
Get dialtone
Dial number
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
Sent: Wednesday, May 20, 2009 2:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce the
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0
T2XXP (PCI) Card 0 Span 2 RED 0 0 0
On 19/5/09 6:31 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
> Please post your CLI output from dahdi show status and dahdi show
channels.
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
> Sent: Tuesday, May 19, 2009 11:22 AM
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
>
>> Can you make an outbound call after your first incoming call? That's
what
> I
> experienced with 1.4.24.
>
> No I can't. I saw similar threads while searching for a solution, but in
my
> case outbound calls are never possible.
>
>
> Regardless, thank you for your suggestion.
>
> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>
>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>
>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>
>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
> to
>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>
>>> There are similar threads I've found on the net but they tend to be
> related
> to
>>> dahdi not being loaded or similar. In my case dahdi is loaded and
> channels
>>> visible.
>>>
>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>>> server that is currently working fine. But still no luck.
>>>
>>> Any hints would be appreciated. In particular if someone can suggest
some
>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>> investigate those.
>>>
>>> Some details below:
>>> <removed in reply to keep email readable>
>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
I'd check my polarity settings in dahdi.conf. Maybe signaling?
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
Sent: Tuesday, May 26, 2009 8:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [9@DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 1
-- Channel 0/1, span 1 got hangup, cause 90
WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
dtmf
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
On 20/5/09 3:52 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
Quote:
This all looks ok. What happens if you try to access the DAHDI channel
outside of Asterisk control:
In dialplan
Exten => 9,1,Dial(DAHDI/1)
Dial 9
Get dialtone
Dial number
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
Sent: Wednesday, May 20, 2009 2:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
I attached the show channels in my first post, but removed it to reduce
the
Quote:
length of replies. Here it is again along with show status.
Note that there is only 1 PRI currently attached.
geriatrix*CLI> dahdi show status
Description Alarms IRQ bpviol
CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0
0
On 19/5/09 6:31 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
> Please post your CLI output from dahdi show status and dahdi show
channels.
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
> Sent: Tuesday, May 19, 2009 11:22 AM
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
>
>> Can you make an outbound call after your first incoming call? That's
what
> I
> experienced with 1.4.24.
>
> No I can't. I saw similar threads while searching for a solution, but in
my
> case outbound calls are never possible.
>
>
> Regardless, thank you for your suggestion.
>
> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>
>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>
>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>
>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full:
Unable
Quote:
> to
>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>
>>> There are similar threads I've found on the net but they tend to be
> related
> to
>>> dahdi not being loaded or similar. In my case dahdi is loaded and
> channels
>>> visible.
>>>
>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from
another
Quote:
>>> server that is currently working fine. But still no luck.
>>>
>>> Any hints would be appreciated. In particular if someone can suggest
some
>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>> investigate those.
>>>
>>> Some details below:
>>> <removed in reply to keep email readable>
>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Tue May 26, 2009 12:52 pm Post subject: [asterisk-users] Unable to make outbound calls
My thoughts exactly. I've tried National2, 4ess and now ni1
ni1 just worked on Asterisk 1.4.22. (failover box I downgraded). So I'm
swapping back to 1.4.24 to test that now.
On 26/5/09 3:34 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
I'd check my polarity settings in dahdi.conf. Maybe signaling?
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
Sent: Tuesday, May 26, 2009 8:22 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Unable to make outbound calls
Sorry. I don't get many opportunities to test this system as its live. Here
are the results:
-- Executing [9@DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 1
-- Channel 0/1, span 1 got hangup, cause 90
WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
dtmf
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
On 20/5/09 3:52 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
> This all looks ok. What happens if you try to access the DAHDI channel
> outside of Asterisk control:
> In dialplan
> Exten => 9,1,Dial(DAHDI/1)
>
> Dial 9
> Get dialtone
> Dial number
>
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
> Sent: Wednesday, May 20, 2009 2:55 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
> I attached the show channels in my first post, but removed it to reduce
the
> length of replies. Here it is again along with show status.
> Note that there is only 1 PRI currently attached.
>
> geriatrix*CLI> dahdi show status
> Description Alarms IRQ bpviol
> CRC4
> T2XXP (PCI) Card 0 Span 1 OK 0 0
0
> T2XXP (PCI) Card 0 Span 2 RED 0 0
0
>
> geriatrix*CLI> dahdi show channels
> Chan Extension Context Language MOH Interpret
> pseudo default default
> 1 DID_span_1 default
> 2 DID_span_1 default
> 3 DID_span_1 default
> 4 DID_span_1 default
> 5 DID_span_1 default
> 6 DID_span_1 default
> 7 DID_span_1 default
> 8 DID_span_1 default
> 9 DID_span_1 default
> 10 DID_span_1 default
> 11 DID_span_1 default
> 12 DID_span_1 default
> 13 DID_span_1 default
> 14 DID_span_1 default
> 15 DID_span_1 default
> 16 DID_span_1 default
> 17 DID_span_1 default
> 18 DID_span_1 default
> 19 DID_span_1 default
> 20 DID_span_1 default
> 21 DID_span_1 default
> 22 DID_span_1 default
> 23 DID_span_1 default
> 25 DID_span_2 default
> 26 DID_span_2 default
> 27 DID_span_2 default
> 28 DID_span_2 default
> 29 DID_span_2 default
> 30 DID_span_2 default
> 31 DID_span_2 default
> 32 DID_span_2 default
> 33 DID_span_2 default
> 34 DID_span_2 default
> 35 DID_span_2 default
> 36 DID_span_2 default
> 37 DID_span_2 default
> 38 DID_span_2 default
> 39 DID_span_2 default
> 40 DID_span_2 default
> 41 DID_span_2 default
> 42 DID_span_2 default
> 43 DID_span_2 default
> 44 DID_span_2 default
> 45 DID_span_2 default
> 46 DID_span_2 default
> 47 DID_span_2 default
>
>
>
> On 19/5/09 6:31 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>
>> Please post your CLI output from dahdi show status and dahdi show
> channels.
>>
>> -----Original Message-----
>> From: asterisk-users-bounces@lists.digium.com
>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>> Sent: Tuesday, May 19, 2009 11:22 AM
>> To: asterisk-users@lists.digium.com
>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>
>>
>>> Can you make an outbound call after your first incoming call? That's
> what
>> I
>> experienced with 1.4.24.
>>
>> No I can't. I saw similar threads while searching for a solution, but in
> my
>> case outbound calls are never possible.
>>
>>
>> Regardless, thank you for your suggestion.
>>
>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>>
>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>>
>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>>
>>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full:
Unable
>> to
>>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>>
>>>> There are similar threads I've found on the net but they tend to be
>> related
>> to
>>>> dahdi not being loaded or similar. In my case dahdi is loaded and
>> channels
>>>> visible.
>>>>
>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from
another
>>>> server that is currently working fine. But still no luck.
>>>>
>>>> Any hints would be appreciated. In particular if someone can suggest
> some
>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>>> investigate those.
>>>>
>>>> Some details below:
>>>> <removed in reply to keep email readable>
>>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Tue May 26, 2009 1:07 pm Post subject: [asterisk-users] Unable to make outbound calls
Ok I've solved the problem. I do not think it was as switchtype issue after
all as it is now working with a national2 configuration.
I need to sort out some of the changes and I'll post back for reference.
However it appears to be some form of parsing order issue between all the
locations that define dahdi trunk groups. What is odd is that this appears
anecdotally to be different between 1.4.22 and 1.4.24. But I'll confirm and
reply.
On 26/5/09 3:46 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
Quote:
My thoughts exactly. I've tried National2, 4ess and now ni1
ni1 just worked on Asterisk 1.4.22. (failover box I downgraded). So I'm
swapping back to 1.4.24 to test that now.
On 26/5/09 3:34 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
> Based on this link -
> http://www.trixbox.org/forums/vendor-forums-certified/sangoma/a101dx-hangup-
> cause-code-90-outbound-calls
>
> I'd check my polarity settings in dahdi.conf. Maybe signaling?
>
> -----Original Message-----
> From: asterisk-users-bounces@lists.digium.com
> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
> Sent: Tuesday, May 26, 2009 8:22 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
> Sorry. I don't get many opportunities to test this system as its live. Here
> are the results:
>
> -- Executing [9@DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
> in new stack
> -- Requested transfer capability: 0x00 - SPEECH
> -- Called 1
> -- Channel 0/1, span 1 got hangup, cause 90
> WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
> dtmf
> -- Hungup 'DAHDI/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
>
>
> On 20/5/09 3:52 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>
>> This all looks ok. What happens if you try to access the DAHDI channel
>> outside of Asterisk control:
>> In dialplan
>> Exten => 9,1,Dial(DAHDI/1)
>>
>> Dial 9
>> Get dialtone
>> Dial number
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces@lists.digium.com
>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>> Sent: Wednesday, May 20, 2009 2:55 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>
>> I attached the show channels in my first post, but removed it to reduce
> the
>> length of replies. Here it is again along with show status.
>> Note that there is only 1 PRI currently attached.
>>
>> geriatrix*CLI> dahdi show status
>> Description Alarms IRQ bpviol
>> CRC4
>> T2XXP (PCI) Card 0 Span 1 OK 0 0
> 0
>> T2XXP (PCI) Card 0 Span 2 RED 0 0
> 0
>>
>> geriatrix*CLI> dahdi show channels
>> Chan Extension Context Language MOH Interpret
>> pseudo default default
>> 1 DID_span_1 default
>> 2 DID_span_1 default
>> 3 DID_span_1 default
>> 4 DID_span_1 default
>> 5 DID_span_1 default
>> 6 DID_span_1 default
>> 7 DID_span_1 default
>> 8 DID_span_1 default
>> 9 DID_span_1 default
>> 10 DID_span_1 default
>> 11 DID_span_1 default
>> 12 DID_span_1 default
>> 13 DID_span_1 default
>> 14 DID_span_1 default
>> 15 DID_span_1 default
>> 16 DID_span_1 default
>> 17 DID_span_1 default
>> 18 DID_span_1 default
>> 19 DID_span_1 default
>> 20 DID_span_1 default
>> 21 DID_span_1 default
>> 22 DID_span_1 default
>> 23 DID_span_1 default
>> 25 DID_span_2 default
>> 26 DID_span_2 default
>> 27 DID_span_2 default
>> 28 DID_span_2 default
>> 29 DID_span_2 default
>> 30 DID_span_2 default
>> 31 DID_span_2 default
>> 32 DID_span_2 default
>> 33 DID_span_2 default
>> 34 DID_span_2 default
>> 35 DID_span_2 default
>> 36 DID_span_2 default
>> 37 DID_span_2 default
>> 38 DID_span_2 default
>> 39 DID_span_2 default
>> 40 DID_span_2 default
>> 41 DID_span_2 default
>> 42 DID_span_2 default
>> 43 DID_span_2 default
>> 44 DID_span_2 default
>> 45 DID_span_2 default
>> 46 DID_span_2 default
>> 47 DID_span_2 default
>>
>>
>>
>> On 19/5/09 6:31 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>>
>>> Please post your CLI output from dahdi show status and dahdi show
>> channels.
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces@lists.digium.com
>>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>>> Sent: Tuesday, May 19, 2009 11:22 AM
>>> To: asterisk-users@lists.digium.com
>>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>>
>>>
>>>> Can you make an outbound call after your first incoming call? That's
>> what
>>> I
>>> experienced with 1.4.24.
>>>
>>> No I can't. I saw similar threads while searching for a solution, but in
>> my
>>> case outbound calls are never possible.
>>>
>>>
>>> Regardless, thank you for your suggestion.
>>>
>>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>>>
>>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>>>
>>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>>>
>>>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full:
> Unable
>>> to
>>>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>>>
>>>>> There are similar threads I've found on the net but they tend to be
>>> related
>>> to
>>>>> dahdi not being loaded or similar. In my case dahdi is loaded and
>>> channels
>>>>> visible.
>>>>>
>>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from
> another
>>>>> server that is currently working fine. But still no luck.
>>>>>
>>>>> Any hints would be appreciated. In particular if someone can suggest
>> some
>>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>>>> investigate those.
>>>>>
>>>>> Some details below:
>>>>> <removed in reply to keep email readable>
>>>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Posted: Mon Jun 01, 2009 11:12 am Post subject: [asterisk-users] Unable to make outbound calls
I've detailed the problem below in case someone else has a similar problem.
At issue was the usage of the following dial command:
From extensions.conf
---
span_1 = DAHDI/g11
1,1,dial(${span_1}/${EXTEN:0})
---
The configuration was rsync'd from a working pair of asterisk servers in
another office. The only difference was the version 1.4.22 for the original
servers that were operating as expected, 1.4.24 and 1.4.24.1 for the new
servers.
Included in both working and non working servers is the following
configuration:
/etc/asterisk/chan_dahdi.conf
---
#include /etc/asterisk/dahdi-channels.conf
---
/etc/asterisk/users.conf (asterisk 1.4.22 w/ SVN-branch-2.0-r4657 GUI)
---
[span_1]
group = 1
hasexten = no
switchtype = national
signalling = pri_cpe
trunkname = Span 1
trunkstyle = digital ; GUI metadata
hassip = no
hasiax = no
context = DID_span_1
zapchan = 1-23
---
/etc/asterisk/users.conf (asterisk 1.4.24[0-1] w/ SVN-branch-2.0-r4661 GUI)
---
group = 1
hasexten = no
switchtype = national
signalling = pri_cpe
trunkname = Span 1
trunkstyle = digital ; GUI metadata
hassip = no
hasiax = no
context = DID_span_1
zapchan = 1-23
dahdichan = 1-23
---
The dial command above did not work on the second group of servers. Instead
I had to change the group to 1 thus:
From new extensions.conf
---
span_1 = DAHDI/g1
1,1,dial(${span_1}/${EXTEN:0})
---
I can only presume some form of precedence overrides the group configuration
in the recent asterisk installs and not for the servers set up earlier.
On 26/5/09 4:01 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
Quote:
Ok I've solved the problem. I do not think it was as switchtype issue after
all as it is now working with a national2 configuration.
I need to sort out some of the changes and I'll post back for reference.
However it appears to be some form of parsing order issue between all the
locations that define dahdi trunk groups. What is odd is that this appears
anecdotally to be different between 1.4.22 and 1.4.24. But I'll confirm and
reply.
On 26/5/09 3:46 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
> My thoughts exactly. I've tried National2, 4ess and now ni1
> ni1 just worked on Asterisk 1.4.22. (failover box I downgraded). So I'm
> swapping back to 1.4.24 to test that now.
>
>
> On 26/5/09 3:34 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>
>> Based on this link -
>> http://www.trixbox.org/forums/vendor-forums-certified/sangoma/a101dx-hangup-
>> cause-code-90-outbound-calls
>>
>> I'd check my polarity settings in dahdi.conf. Maybe signaling?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces@lists.digium.com
>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>> Sent: Tuesday, May 26, 2009 8:22 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>
>> Sorry. I don't get many opportunities to test this system as its live. Here
>> are the results:
>>
>> -- Executing [9@DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
>> in new stack
>> -- Requested transfer capability: 0x00 - SPEECH
>> -- Called 1
>> -- Channel 0/1, span 1 got hangup, cause 90
>> WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
>> dtmf
>> -- Hungup 'DAHDI/1-1'
>> == Everyone is busy/congested at this time (1:0/0/1)
>>
>>
>> On 20/5/09 3:52 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>>
>>> This all looks ok. What happens if you try to access the DAHDI channel
>>> outside of Asterisk control:
>>> In dialplan
>>> Exten => 9,1,Dial(DAHDI/1)
>>>
>>> Dial 9
>>> Get dialtone
>>> Dial number
>>>
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces@lists.digium.com
>>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>>> Sent: Wednesday, May 20, 2009 2:55 AM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>>
>>> I attached the show channels in my first post, but removed it to reduce
>> the
>>> length of replies. Here it is again along with show status.
>>> Note that there is only 1 PRI currently attached.
>>>
>>> geriatrix*CLI> dahdi show status
>>> Description Alarms IRQ bpviol
>>> CRC4
>>> T2XXP (PCI) Card 0 Span 1 OK 0 0
>> 0
>>> T2XXP (PCI) Card 0 Span 2 RED 0 0
>> 0
>>>
>>> geriatrix*CLI> dahdi show channels
>>> Chan Extension Context Language MOH Interpret
>>> pseudo default default
>>> 1 DID_span_1 default
>>> 2 DID_span_1 default
>>> 3 DID_span_1 default
>>> 4 DID_span_1 default
>>> 5 DID_span_1 default
>>> 6 DID_span_1 default
>>> 7 DID_span_1 default
>>> 8 DID_span_1 default
>>> 9 DID_span_1 default
>>> 10 DID_span_1 default
>>> 11 DID_span_1 default
>>> 12 DID_span_1 default
>>> 13 DID_span_1 default
>>> 14 DID_span_1 default
>>> 15 DID_span_1 default
>>> 16 DID_span_1 default
>>> 17 DID_span_1 default
>>> 18 DID_span_1 default
>>> 19 DID_span_1 default
>>> 20 DID_span_1 default
>>> 21 DID_span_1 default
>>> 22 DID_span_1 default
>>> 23 DID_span_1 default
>>> 25 DID_span_2 default
>>> 26 DID_span_2 default
>>> 27 DID_span_2 default
>>> 28 DID_span_2 default
>>> 29 DID_span_2 default
>>> 30 DID_span_2 default
>>> 31 DID_span_2 default
>>> 32 DID_span_2 default
>>> 33 DID_span_2 default
>>> 34 DID_span_2 default
>>> 35 DID_span_2 default
>>> 36 DID_span_2 default
>>> 37 DID_span_2 default
>>> 38 DID_span_2 default
>>> 39 DID_span_2 default
>>> 40 DID_span_2 default
>>> 41 DID_span_2 default
>>> 42 DID_span_2 default
>>> 43 DID_span_2 default
>>> 44 DID_span_2 default
>>> 45 DID_span_2 default
>>> 46 DID_span_2 default
>>> 47 DID_span_2 default
>>>
>>>
>>>
>>> On 19/5/09 6:31 PM, "Danny Nicholas" <danny@debsinc.com> wrote:
>>>
>>>> Please post your CLI output from dahdi show status and dahdi show
>>> channels.
>>>>
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces@lists.digium.com
>>>> [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kal Feher
>>>> Sent: Tuesday, May 19, 2009 11:22 AM
>>>> To: asterisk-users@lists.digium.com
>>>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>>>
>>>>
>>>>> Can you make an outbound call after your first incoming call? That's
>>> what
>>>> I
>>>> experienced with 1.4.24.
>>>>
>>>> No I can't. I saw similar threads while searching for a solution, but in
>>> my
>>>> case outbound calls are never possible.
>>>>
>>>>
>>>> Regardless, thank you for your suggestion.
>>>>
>>>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher@melbourneit.com.au> wrote:
>>>>
>>>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>>>>
>>>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>>>>
>>>>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full:
>> Unable
>>>> to
>>>>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>>>>
>>>>>> There are similar threads I've found on the net but they tend to be
>>>> related
>>>> to
>>>>>> dahdi not being loaded or similar. In my case dahdi is loaded and
>>>> channels
>>>>>> visible.
>>>>>>
>>>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from
>> another
>>>>>> server that is currently working fine. But still no luck.
>>>>>>
>>>>>> Any hints would be appreciated. In particular if someone can suggest
>>> some
>>>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>>>>> investigate those.
>>>>>>
>>>>>> Some details below:
>>>>>> <removed in reply to keep email readable>
>>>>
--
Kal
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
